Audio-Technica AT3035/ATHM20

AT 3035 Large Diaphragm Condenser Microphone
Designed for critical home/project/professional studio applications and live performance, this 30 Series large-diaphragm side-address cardioid condenser delivers exceptional detail and low noise. With its extended low-frequency response, the AT3035 produces rich, full sound reproduction and handles extremely high sound pressure levels with ease. Tailored for a smooth, natural sound, this mic is a perfect complement for digital recording equipment. Along with its rugged construction and high-performance specifications, the AT3035 provides an exceptional level of consistency from model to model.

AT 3035 Features

• Custom-engineered large diaphragm for exceptional detail and low noise
• Cardioid polar pattern reduces pickup of sounds from the sides and rear,improving isolation of desired sound source
• High max SPL, wide dynamic range and optimized output level provideunmatched versatility
• Low self-noise (12 dB SPL) – perfectly suited for today's mostsophisticated digital recording equipment
• Extended low-frequency response for rich, full sound
• State-of-the-art surface-mount electronics ensure compliance with A-T'sstringent consistency and reliability standards
• Custom shock mount provides superior isolation
• Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad

AT 3035 Specifications

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll-Off: 80Hz, 12 dB/octave
• Open Circuit Sensitivity: -32dB (25.1mV) re 1V at 1 Pa
• Impedance: 250 ohms
• Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL,with 10 dB pad (nominal)
• Noise: 12 dB SPL
• Dynamic Range (Typical): 136 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 82 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 3 mA typical
• Switches: Flat, roll-ff; 10dB pad (nominal)
• Weight: 13.8 oz
• Dimensions: 6.69" long, 2.05" maximum body diameter
• Output Connector: Integral 3-pin XLRM-type
• Accessories Furnished: AT8458 shock mount for 5/8"-27 threaded stands;softprotective pouch

ATHM20 Closed Back Stereo Headphones
Following in the tradition of the ATH-M30 and ATH-M40 professional monitor headphones, the new ATH-M20 headphones utilize a closed-back design, feature a rich bass response with an extended high end, and are available at an extremely affordable price point.

Employing Audio Technica's latest transducer technology, the ATH-M20s offer a high level of sonic accuracy in a design engineered to provide maximum comfort for hours of listening. They feature a low-profile, closed-back design providing clarity and isolation in high-volume listening situations. They also feature 40 mm drivers, each with a neodymium magnet structure, and have a frequency response of 30 - 20,000 Hz.

ATHM20 Features:

• Closed-back dynamic stereo headphones deliver exceptional clarity
• Rich bass response with extended high end
• 40 mm drivers with neodymium magnets and copper-clad aluminum wire voicecoils
• Circumaural design ensures superior isolation
• Adjustable cushioned headband and lightweight design for maximum comfort
• 1/8" (3.5 mm) stereo connector and snap-on 1/4" (6.3 mm) adapter
• Ultra-flexible 10' coiled cable with left-side entry

ATHM20 Specifications:

• Operation: Closed-back
• Element: Dynamic
• Driver Diameter: 40 mm
• Frequency Response: 30 Hz - 20 kHz
• Sensitivity (1 mW): 98 dB
• Magnet Type: Neodymium
• Impedance: 40 ohms
• Max. Input Power: 1,200 mW @ 1 kHz
• Weight (less cable): 7.1 oz (230 g)
• Cable: 10 feet (3.0 m), coiled, left-side entry
• Connector: 1/8" (3.5mm) stereo mini-plug w/ snap-on 1/4" (6.3mm)adapter

TMGR# AT3035/ATHM20