MOTU HD192-CORE-SYSTEM-RESTOCK

The MOTU HD192 high- definition 192-kHz audio interface is designed for those who demand the very best audio quality available. Equipped with the latest generation 24-bit, enhanced multi-bit 128x oversampling 192-kHz converters, the HD192 achieves a remarkable A-weighted signal-to-noise ratio of 120 dB with balanced XLR connectors throughout. Ideal for surround applications, the HD192's 12 inputs and 12 outputs can support two simultaneous 5.1 mixes. And the HD192 is full of advanced features, like AES/EBU I/O with sample rate conversion both in and out.

The most important link in the digital recording chain is the A/D converter. It is the critical component that converts your analog input signal into digital information. The higher the quality of the A/D converter, the better your recordings will sound. The 192-kHz converters in the HD192 are the very same used in more expensive HD systems. With 120dB A-weighted dynamic range and a THD+N of 0.0005%, the HD192 is simply the best sounding front end you can buy for your digital audio workstation.

Metering
The HD192's front panel provides dedicated 19-segment level meters for all 12 inputs and outputs. Two over meters are included, a temporary over meter and an over/hold meter that is resettable via software. Comprehensive clock status LEDs are also included so you can see at a glance the current sampling rate and clock source.

Front Panel Power Switch
Useful in the unlikely event you wish to turn off your HD192. An interesting fact about MOTU Audio interfaces is that they are hot swappable. This means you can power off, plug-in, add and remove interfaces without turning your computer off or restarting.

AES/EBU
The HD192 features stereo AES/EBU digital I/O with built in sample rate conversion. This gives you the ability to integrate external digital audio sources, no matter what the sample rate, while recording audio at higher sample rates on the analog I/O of the HD192. For example, you can still take advantage of the 96-kHz digital I/O on your favorite outboard reverb, while recording audio at 192-kHz.

Word Clock I/O
The HD192 audio interface provides industry standard word clock input and output. The word clock input allows the HD192 to synchronize smoothly with today's digital audio studio. The word clock output can be used as a master clock to drive other digital devices in your studio, such as a digital mixer. The AES digital I/O can be driven separately via a dedicated word clock input. You can even slave to a 48kHz clock source, even when the HD192 is operating at 192-kHz.

Audio Wire
The HD192 uses the second generation Audio Wire we introduced with the 2408mk3. It is a high-bandwidth digital audio format capable of carrying up to 24 channels of 96-kHz or 12 channels of 192-kHz digital audio in and out of the computer at the same time.

Power Supply
Like all MOTU hardware products, the HD192 comes with an internal power supply and standard detachable IEC power cable. No wall warts or line lumps.