Gefen Inc EXT-VGA-CAT5-148S
1:8 VGA CAT5 Distribution Amplifier

EXT-VGA-CAT5-148S

Gefen's 1:8 VGA CAT5 Distribution Amplifier is ideal for those needing to send one source to multiple displays in remote locations at the same time.  The 1:8 VGA CAT5 Distribution Amplifier has eight RJ-45 output connectors and one VGA input.  The RJ-45 connectors connect to a maximum of eight VGA CAT5 Distribution Amplifier receivers (which can be placed up to 330 ft. away) using industry standard CAT5 cables.

Connect your VGA video source to the 1:8 VGA CAT5 Distribution Amplifier's input.  Then, connect up to eight VGA displays to the VGA CAT5 receivers.  Power on the 1:8 VGA CAT5 Distribution Amplifier and the receivers will get power from the CAT5.  The 1x8 VGA CAT5 Distribution Amplifier will also extend a component signal or composite video with L+R analog audio.  For this to work properly, you will need a VGA to Component Cables and a VGA Female to Female Adapter.

VGA output #1 is the primary connection and is used for the main display.  VGA outputs 2 through 8 follow the main display.  The VGA displays attached to the 1:8 VGA CAT5 Distribution Amplifier MUST have the same native resolution in order to get a picture.

Features:

• Easily distribute one source to eight simultaneous displays
• Extends video signals up to 330 feet over CAT-5e
• Supports component video distribution
• Maintains 1920 x 1200 resolution video
• Allows eight monitors to be connected to the same video source at the sametime

Specifications:

• Video Amplifier Bandwidth: 350 MHz
• Input Video Signal: 1.2 volts p-p
• Input Sync Signal: 5 volts p-p (TTL)
• Horizontal Frequency Range: 15 - 70 KHz
• Vertical Frequency Range: 30 - 170 Hz
• Video In: HD-15
• Video out: HD-15
• Link Connector: RJ-45
• Power Supply: 5 VDC (external)
• Power Consumption: 30 Watts (max.)
• Sender Dimensions: 8.5" W x 1.75" H x 4.5" D
• Receiver Dimensions: 1" W x 1" H x 4" D
• Shipping Weight: 3 lbs.

Our Part #  EXT-VGA-CAT5-148S