Datavideo Corporation SE-900
8-Input Video Switcher WITHOUT Input Cards

SE-900

Datavideo's SE-900 is a 2-piece, 8-input SD switcher with multiview output.  The SE-900 accepts any combination of up to 8 input boards for DV, SDI, DVI,VGA, YUV, S-Video and composite video.  Option cards include: 2-channel chromakey, external genlock and SDI output.

NOTE: The SE-900 comes without input and option cards.  If you buy a unit without cards, 2 are required for a transition although the switcher can accept up to 8.  If you purchase the cards at the same time as the switcher Datavideo will install and test them for you at no charge. Please contact your sales representative for more information.

What's in the Box:

• SE-900 Unit
• 1x 4ft (1.22m) 9-pin to 9-pin male to female serial cable
• 1x 4ft (1.22m) 9-pin to 9-pin male to male serial cable
• 2x 4ft (1.22m) 15-pin to 15-pin male to female serial cables
• 1x Mains Cable
• Main Unit: 12V 10A DC 110/220 power supply and cord
• Control Panel: 12V 1.2A DC 110/220 power supply and cord
• Instruction Manual

Features:

• Multiple outputs (SDI, DV, YUV, S-Video and/or Composite) all active at the same time.
• Built-in frame synchronizer and TBC for each input for glitch-free switching in any format.
• CG Board included.  Used with the CG-100 or any other SDI I/O CG, text/graphics will appear on all outputs.
• Picture-in-Picture included (2 fixed sizes, able to move from off-screen to off-screen)
• Over 50 Digital Effects (including 15 transitions with borders) with six speeds, plus 6 special effects.
• Four Input Chromakey: Cut between two backgrounds and two foregrounds. (Chromakey card required, sold separately)
• Settings Memory: Last settings automatically saved at power down
• Logo Overlay included – use 24-bit RGB 96×24 bitmap image or input source (2 logos)
• Tally Light Function: 8 tally outputs each with program and next. (Tally lights not included)
• GPI input trigger can sequence 10 pre-programmed effects.

Specifications:

• Preview: DVI Multi-image preview output shows all Sources, Program, & Next.
• Audio Delay: Audio delay built in (0-17 frames)
• Audio Embedder: DV/SDI audio embedder for output included.
• Audio De-Embedder: DV/SDI audio de-embedder with dual channel balanced audio output for each input
• Control: GPI and RS-232/RS-422 control interface
• Output: Composite video output on each video input card
• Preview Key: Pressing the "Preview" key shows the next effect
• Color Processor: white balance for each input
• Time Code: V1.4 firmware can show time code on the SDI input
• Control: RS-232 or RS-422 control interface. The rack mounted processing unit of the SE-900 and control panel are connected by and RS232 cable.
• Main Unit Power: 12V 10A DC 110/220
• Control Panel Power: 12V 1.2A DC 110/220

Connections:

• Video:
  - Inputs: Up to 8 inputs with a choice of SDI, DV, DVI, component (Y:U:V), S-Video (Y/C) & Composite
  - Outputs: Optional SDI, DV, YUV, S-Video and/or Composite.
• Audio:
  - Input: Stereo pair – balanced XLR and RCA
  - Output: Stereo pair – balanced XLR and RCA

Control Panel:

• Dimensions: 17" L x 12.24" W x 3.75" H
• Weight: 5.5 lbs

Processor Unit:

• Dimensions: 19" L x 17.5" W x 7.25" H
• Weight: 31 lbs

Our Part #  SE-900