Look Solutions CF-0401
1500 Watt Cryo-Fogger

CF-0401

The Cryo-Fog is a powerful 1500 Watt fog generator, a fan and a cooling chamber built into a compact flightcase (67 x 51 x 30 cm) with space next to the fog generator to hold a 5 liter can of fluid. Liquid CO2 is used to cool down the fog of the built-in low-temperature fog generator. Thus, the machine produce thick low fog which distributes evenly. The machine is powerful enough to fill big stages with low fog within a short time. The liquid CO2 is delivered from a low pressure tank (20-24 bar), which is connected to the machine via a hose.  The intelligent technology ensures sure that the fogging process will not start before the cooling chamber has reached the right temperature. As a result, no "warm" fog - which will go upwards - can escape from the machine.  The machine benefits from its compact size, low weight, powerful output, low noise and the easy operation.

The Cryo-Fog can be controlled via DMX 512. The machine uses three channels on the desk. So, the pump, the fan and also the CO2-valve can be adjusted separately.  If the Cryo-Fog is controlled via DMX, the machine can also be used as a "normal" fog generator. The DMX start address can be adjusted and saved via the control panel.

The machine can also be controlled with analogue (0 - 10 V) via a lighting desk or via XLR-remote (option). The fogging process starts automatically as soon as the cooling chamber has reached the right temperature. A stand-alone-mode is also possible. The adjustment of the pump is done directly at the machine. The fan runs automatically. A short press at the start button makes the machine run and the fogging process start as soon as the cooling chamber has reached the right temperature.  Therefore, keeping the start button permanently pressed is unnecessary.

Features

• The control panel with LED-display has simple symbols to allow for easy operation. It also protects the control buttons against dirt.

• Digital technology makes fine adjustment of the pump possible. In 1% increments, the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the Cryo-Fog to be used in both small and large locations.

Specifications:

• Power requirement: 2200 Watt
• Voltage: 230V/50Hz
• Warm up time: approx. 7 min.
• Fluid consumption at max. output: 100 ml/min
• Fluid consumption at 50% output: 40 ml/min.
• Liquid CO2 consumption at max. output: 2 kg/min.
• Fluid tank capacity: 5 liter
• Fog output: adjustable in 99 steps
• Fogging time: continuous output
• Control: DMX 512
  0 - 10 V analog
  Stand-alone-Mode
• Temperature control: Microprocessor controlled
• Overheating protection: Heater block/Thermostat
  Pump/Thermal switch
• Dimensions (L x W x H): 67 x 51 x 30 cm
• Weight without bottle: 28 kg

Advantages

• Fog generator, fan and cooling system in a compact case
• DMX as standard, analogue (0 - 10V) andStand-alone-Mode
• In the DMX Mode, the pump, the fan and the CO2-valve can beadjusted separately
• Can be used as a "normal" fog generator in DMX-Mode
• Low fogging process starts automatically only if the coolingchamber has reached the right temperature
• Easy handling
• Powerful output
• Fogging output adjustable in steps of 1% from 0 -99%
• Continuous output
• Easy bottle changing with quick-out connectors

Our Part #  CF-0401