Look Solutions VI-0194
Viper NT Fog Generator

VI-0194

The Viper NT originates from the continued development and improvement of the Viper fog machine.  It unites the current digital technology with the proven technique and power of its predecessor.  Features a much simpler operation, reducing the amount of time needed to set up the machine.

Features:

• The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.
• Digital technology makes fine adjustment of the pump possible. In 1% increments, the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the Viper NT to be used in both small and large locations.
• The Viper NT can be controlled via DMX 512. The connection is done with 5-Pin XLR plugs.  The DMX start address can be adjusted and saved via the control panel.  The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote (option).  This connection is done with 3-Pin XLR plugs.  A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press of the start button makes the machine run.
• With the internal timer, the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %.

The Viper NT is equipped with new safety features.  On the front and back part of the cover, there are fixing points for safety bonds.  At both sides of the bottom of the machine are three holes to which a hanging yoke (complete with a collecting tray for fluid drips) can be fixed.

The following Look-fog fluids are available for the Viper NT:

• Quick-Fog (thick, quick disappearing fluid)
• Regular-Fog (thick, long lasting fluid)
• Slow-Fog (thick, extremly long lasting fluid)

Specifications:

• Power requirement: 1300 Watt
• Voltage: 230V/50Hz or 120V/60Hz
• Warm up time: approx. 7 min.
• Fluid consumption at max. output: 120 ml/min.
• Fluid consumption at continuous output: 35 ml/min.
• Fluid tank capacity: 5 liter
• Fog output adjustable in 99 steps
• Output projection max.: 15 m
• Fogging time at < 50% output: continuous output
• Control: DMX 512
  0 - 10 V analog
  Stand-alone-Mode
  Radio remote (option)
• Temperature control: Microprocessor controlled
• Overheating protection: Heater block/Thermostat
  Pump/Thermal switch
• Dimensions (L x W x H): 47 x 23 x 24 cm
• Weight without bottle: approx. 8.6 kg

Advantages:

• DMX as standard, analog and stand-alone-Mode
• Internal timer
• Easy handling
• Powerful output
• Fogging output adjustable in steps of 1% from 0 - 99%
• Continuous output
• Easy bottle changing with quick-out connectors

Our Part #  VI-0194