Look Solutions UN-0365

The Unique2 haze machine, the follow-up model of the Unique) offers various features, which open up new fields of operation to the user.  Not only has the design been changed, the Unique2 is also equipped with new features like an internal timer and a brand new Haze-Density Control System (HDCS). With this HDCS, an individual profile for a show can be programmed.

Due to the new, more efficient fan, the haze can be distributed in the room quickly. A replaceable filter protects the fan against dirt.  With its variable output, the machine can be used in many fields. Any desired effect can be achieved: from the finest mist to a thick haze, similar to fog.  Therefore, the machine is able to fill small and big rooms or halls with a constant haze, creating the right atmosphere and excellently supporting lighting effects.

Features:

• A minimal warming up time of approx. 60 seconds means theUnique2 is ready for operation almost immediately.  A continuous outputis guaranteed by the fact that the machine does not have to warm up duringoperation.
• The pump and the fan of the machine can be adjusted separatelyin 99 steps. Thus the user is able to adjust the density and outputexactly.  A non-linear pump regulation make sure that the pump can beadjusted much better at the lower steps.
• Due to the fact that the pump and the fan can be dampened, thesound of the Unique2 can be absorbed  tremendously. So the machine can beused in fields of operation where any sound is undesirable anddisturbing.
• The control of the pump and fan, the adjusting of the DMXstart address and also the adjusting of the Timer and the HDCS is achievedwith buttons. The adjusted data can be read at the LED-Display.
• The Unique2 can be controlled via DMX 512. Pump and fan can beadjusted separately. The connection is done with 5-pin-XLR plugs using twofollowing control channels at the desk.  The machine can also becontrolled with analogue (0-10V) via a lighting desk and via cable remote(option). This connection is done with 3-pin-XLR plugs.  A stand-alonerunning is also possible. The adjustments are done directly at themachine.
• With the internal Timer the haze time can be exactly adjustedin seconds, the wait time in minutes and the output of pump and fan in%.
• With the Haze-Density Control System (HDCS) an individualprofile for a show can be programmed. Two Levels with the required pumand fanvalues along with a haze time can be adjusted.  Additionally a pre-runtime can be programmed.
• A special fluid guarantees minimal fluid consumption, lowrunning costs and an optimal haze effect.  It is supplied in2l-canisters.  One of these canisters guarantees up to 50 hours ofcontinuous output.

Specifications:

• Power requirement: 1500 Watt
• Voltage: 230 V/50 Hz or 120V/60Hz
• Warm up time: approx. 60 sec.
• Fluid tank capacity: 2 Liter
• Internal fan: > 6000 l/min.
• Haze density: adjustable in 99 steps
• Control: DMX 512
  0 – 10 Vanalog
  Stand-alone-Mode
  XLR-remote (option)
• Dimensions (L x W x H): 47 x 25 x 25 cm
• Weight without bottle: approx. 8.7 kg

Advantages:

• Minimal warm up time (approx. 60 sec.)
• Pump and fan adjustable in 99 steps, allowing for variableoutput (from the finest mist to a thick haze, similar to fog)
• Internal fan for quick and homogenous distribution
• DMX as standard, analog (0-10V) and stand-alonerunning
• Control of the pump, fan and the adjusting of the DMX startaddress is achieved with buttons
• Internal Timer
• Haze-density Control System (HDCS)
• Can be controlled via cable remote (option)
• Very silent
• Minimal fluid consumption (2l canister guarantees up to 50hours continuous output)