Applied Microphone (AMT) SYSTEM-1

The System 1 is a low profile condenser microphone that attaches to the bell of any flanged bell instrument such as woodwind and brass, with a low mass clip. It can also clamp to many other instruments using the AMT "Universal Clamp". The microphone provides pure tonal reproduction while being unobtrusive. The System 1 microphone element is designed to be used with 40 or more instruments. It's response is designed to complement everything from brass and woodwinds to percussion.

With the included clip portion of the "Universal Clamp", the System 1 can be used on soprano, alto, tenor and bari sax, as well as trumpet, trombone, baritone horn, flugelhorn and tuba. The clip portion of the "Universal Clamp" is used for flanged bell instruments such as brass and woodwinds. It is a spring loaded design with a set screw that can reinforce stability on the horn if the player needs. The microphone attaches to the bell of the instrument, and is suspended in a 4-point isolation ring reducing valve, key, click, and handling noise.

The AMT System 1 features a flexible gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.

The System 1 is terminated by a 3.5mm plug which connects to a special metal belt pack preamp. The included belt pack has an XLR output. It is powered by either 1 AA battery or phantom power. The belt pack powers the microphone system appropriately and needs to be used.

Use it with:

• Soprano sax
• Alto sax
• Tenor sax
• Bari sax
• Trumpet
• Trombone
• Baritone Horn
• Fluglehorn
• Tuba
• Euphonium
• Sousaphone
• Piccolo
• C Flute
• Alto Flute
• Bass Flute
• Banjo
• Cornet
• Pocket Trumpet
• Violin
• Viola
• Mandolin
• French Horn
• Recorder
• Eb Soprano Clarinet
• Bb Clarinet
• Alto Clarinet
• Bass Clarinet (requries special AMT Bass Clarinet clip)
• Oboe
• English Horn
• Conga
• Timbales
• Djembe
• Glockenspiel
• Tympani
• Bongos
• Snare Drum
• Tom-Toms
• Steel Drum
• Vibes (see AMT VP3 for Mallet Microphone Systems)
• Marimba (see AMT VP3 for Mallet Microphone Systems)
• Xylophone (see AMT VP3 for Mallet Microphone Systems)

Comes with:

• AMT System 1 microphone with isolation ring
• System 1 metal belt pack preamp with XLR output and cut filter
• Universal clamp
• Soft carrying case

Specifications

• Element: Condenser
• Polar Pattern: Cardioid
• Frequency: 50Hz-18kHz
• Sensitivity: -65dB+ 4dB
• Impedance: 150 ohms
• Phantom Power: 12 to 52V DC; Self-powered battery
• Max Input SPL: 120dB
• Dimension: 3.5" flex arm
• Cable: 6'
• Weight: Mic only: 36 grams

Wireless Ability
The AMT System 1 can be used with most major brand wireless belt pack transmitters and receivers. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. When ordering the AMT Interface, be sure to know your wireless make, model, and pin out configuration. Interfaces are made to order. The AMT System 1 will connect directly to Sennheiser Evolution belt pack transmitters.

TMGR# SYSTEM-1