Avantone CK-6
Large Diaphragm Condenser Microphone, Cardioid

CK-6

The AVANTONE “Cabernet (C-series)” mics from AVANT ELECTRONICS are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The AVANTONE CK-6 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics...but at a fraction of their cost.

The rugged CK-6 microphone body and capsule assembly are precision machined of brass. Aesthetically the compact body  features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and grill. The transformerless Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs.

Standard Items Supplied:

• CK-6 Cardioid FET Microphone
• Custom Retro Shockmount
• Elegant padded genuine wooden mic box
• Padded aluminum storage/travel case
• Ownders manual

Features

• The -10dB attenuation switch can be engaged when miking veryhigh SPL sources to keep from overloading the electronics.
• The 80Hz HIGH-PASS filter switch can be engaged to reducerumble and to keep unwanted low frequencies from “muddying up” thetrack.
• Manufactured using the finest materials yielding a very solidfeel, superb structural integrity and rugged reliability.
• The versatile CK-6 mic is able to produce professional resultswith a clean sonic character.
• The included Custom Retro Shockmount is superb in allowing aprecise positioning of the mic while inhibiting the transfer of unwantedvibrations up into the mic. This isolation allows for superior professionalresults.
• Transformerless CLASS A FET Microphone w/32mm gold sputteredthin Mylar capsule
• -10 dB pad  &  80 Hz LF roll offswitches

Specifications

• Type: True transformerless condenser
• Polar Pattern: Cardioid
• Frequency Response: 35-20,000 Hz +/-3.5dB
• Output Impedance: <=200 ohms
• Maximum SPL: 136dB (0.5% THD @ 1kHz)
• Equivalent Noise Level: <17dB
• Output Connector: Male XLR 3 pin
• High Pass Switch: 80Hz -6dB/octave
• Attenuation Switch: -10dB
• Power Requirement: 48V Phantom power
• Finish: Polished nickel trim, metallic cabernet red body

Our Part #  CK-6