Equator Q15-EQUATOR
15" ActiveMonitor, Bi-Amp 1000W/200W Continuous (Sold Each)

Q15-EQUATOR

The Q series built-in DSP gives you extraordinary control over the speakers' accuracy and resopnse in your mixing environment. Enter your room's dimensions into the included software, and the monitors digitally correct for three standing waves (front to back wall, left to right wall, and floor to ceiling). Enter each speaker's position in the room, and the software digitally compensates for pi space and boundary/placement anomalies.

Add the optional Secondary Reflection Correction package, and fully automated control is at your fingertips. Featuring a series of proprietary algorithms for the analysis, correction, and compensation of room response characteristics, the SRC software - in combination with a specialized calibrated microphone (included) - measures each speaker and makes adjustments to optimize the speakers' response for specified listening positions in the room. Stereo, 2.1, 5.1, 6.1, 7.1 and 8.2 monitoring configurations can be quickly and easily optimized and saved. You can even create multi-position configurations, so the engineer can monitor properly at the mix position, and the band can listen accurately and comfortably from the control room couch.

Reflected waves bouncing off your console or your video monitor are the bane of just about every recording musician on the planet. These secondary reflections can cause frequency dips and comb filtering in the critical 800Hz-3kHz range, giving you a skewed tonal picture and wreaking serious havoc with your stereo imaging. They're one of the main reasons that mixes leave studios with buried vocals, harsh guitars, and other sonic unpleasantries.

The Secondary Reflection Correction software identifies, then digitally corrects for these undesirable reflections. So when you listen to your mix on a Q monitor, you're hearing pure, uncolored, and totally unobstructed.

Features

• Zero-Point Reference™
  Two drivers, one sonic point source. Perfect phase and time coherence along the X, Y, and Z axes. Exceptional off-axis imaging in both the horizontal and vertical planes.
• Digital Self-Correction
  Automatic driver tolerance compensation.
  Automatic three-stage (length/width/height) room standing wave and secondary reflection correction.
  Automatic pi boundary compensation.
• High Definition Titanium Compression Horn Driver
  The custom titanium compression driver delivers exceptionally precise, detailed, and accurate high frequency response. The horn’s uniquely-designed throat section creates an extended horizontal high frequency dispersion pattern, and provides superior off-axis response in both the vertical and horizontal planes.
• Zero-Point Reference™ Coaxial Design
  Digital control over the driver components allows for perfect audio alignment between the low and high frequency transducers on all three axes—X (horizontal), Y (vertical), and Z (depth). The result: Superb imaging, enhanced off-axis response, and exceptional midrange clarity.
• Fiberglass-Impregnated Low Frequency Driver
  The woofer cone is fashioned from a blended fiberglass/pulp mixture, chosen for its strength and damping characteristics. The cone’s straight-sided shape minimizes decoupling of acoustic energy with the energy of the surround and voice coil.
• Programmable DSP Control Display
  The multi-segment LED allows you to monitor power protection, network communication, volume, and compression/limiting (when enabled). LED brightness is
  controllable via USB.
• Cast Aluminum CAD Coaxial Driver Basket
  A performance-enhancing top plate for the woofer’s magnet assembly cools the voice coil and provides a significant increase in midrange performance. The cast
  aluminum coaxial driver basket also serves as a heat sink to the top plate of the magnet structure, allowing the speaker to run cooler at high power levels.
• Polyester Half-Roll Flexible Surround
  Featuring excellent excursion and weight-to-strength properties—while also maintaining proper phase relationship with the LF cone—the custom half-roll
  surround provides exceptionally accurate operation, even at high sound pressure levels.
• 13-Ply Baltic Birch Resonant Damping Cabinet
  The Q series enclosure sides and backs are constructed from 13-layer Baltic birch; the sculptured front baffle is 1” HDF. Together they provide the optimum combination of acoustic damping and enclosure strength. The Q12 and Q15 are equipped with cast aluminum handles. and all models are lined with rubber support
  pads and feature OmniMounttmcompatible mounting holes.
• Continuous-Flow Low Turbulence Bass Ports
  Two large, long. graduallydirected low air-restriction bass ports provide turbulence-free, quiet operation—giving the Q series the dramatic low end punch of a virtually uncompressed tuned bass-reflex.

Specifications

• Low Frequency Driver: 15" ZPR coaxial fiberglass-impregnated pulp with flexible half-roll polyester surround
• High Frequency Driver: 1.5" ZPR coaxial titanium dome compression driver w/resin-coated constant directivity horn
• Voice Coil: 4" with ferrite motor
• Frequency Response: 29Hz-22kHz, -3dB
• Amplifier Power, Continuous: 1000W LF/200W HF
• Amplifier Power, Peak: 2000W LF/400W HF
• Maximum SPL: 121dB
• Crossover: 1.2kHz
• Inputs: Balanced XLR, TRS 1/4", USB, RS485 in/thru
• Display: Multi-segment LED for power, volume, protection, compression, and communication status
• Protection: Thermal, compression (user selectable on/off), short circuit, under voltage, EMI interference, magnetic shielding
• Enclosure: 3/4" 13-layer Baltic birch sides and back; 1" HDF front baffle
• Dimensions (H x W x D): 21" x 21" x 21"
• Weight: 92 lbs
• DSP: 24-bit 96kHz processing with 28-bit coefficients, 48-bit inter-stage data word size, and 76-bit accumulator
• DSP Functions: Aligns phase and time coherence of low and high frequency drivers; Corrects for listening environment standing waves on X (horizontal), Y (vertical), and Z (depth) axes; Compensates for speaker pi (ð) space placement; Adjusts for speaker boundary proximity; Supports stereo, 2.1, 5.1, 6.1, 7.1 and 8.2 configurations
• DSP Features:  Automated standing wave correction (X, Y, and Z axes); Automated room boundary and pi space correction; Automated correction for secondary reflections (from consoles, video monitors, etc.); Supports correction for multiple listening positions; Save and recall configurations; Includes software and calibrated measurement microphone

Our Part #  Q15-EQUATOR