Neutrik NBB75SI
Isolated Bulkhead BNC Jack (Solder Version)

NBB75SI

The bulkhead connector offers a true 75 ohm design for serial and digital (HD) signals.  The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use.

Features:

• Gold plated center contact
• True 75 Ohm design meets the stringent HD requirements
• Isolated panel mount (solves potential grounding problems and prevents common-mode influence with other connections conducted over the same panel ground potential)
• Grounded panel mount possible (with removal of isolation washer)

Specifications:

• Connector Type: BNC 75 Ohm
• Gender: female
• Signal Type: HD, SDI, Video, AES/EBU, Composite, YUV, RGB, RGBH, RGBHV
• Contact resistance: = 3 mOhm (inner)
• Dielectric strength 1,5 kVdc
• Impedance: 75 Ohm
• Insulation resistance: > 5 GOhm
• Rated voltage: 500 V
• VSWR: = 1.03 / > 37 dB up to 1 GHz
  = 1.05 / > 32 dB up to 2 GHz
  = 1.08 / > 28 dB up to 3 GHz
• Cable retention force: > 50 N
• Insertion force: < 25 N
• Lifetime: > 1000 mating cycles
• Wiring: solder contact
• Locking device: Bayonet
• Mounting direction: front
• Chassis shape: 12.7 mm
• Contacts: Brass (Ground contact)
  Brass, 0.2 µm AuCo (Center contact)
• Insert: Teflon PTFE
• Shell: Brass
  Polyacetal Polyacetal (POM) (Insulation Sheell)
• Shell plating: Optalloy®
• D-Shape housing: Zinc diecast gal Ni plating
• Standard compliance: IEC 6016908, MIL 348A
• Temperature range: -30 °C to +85 °C

Our Part #  NBB75SI