Electro-Voice DC-ONE
Digital Speaker Processor, 2 In, 6 Out

DC-ONE

Based on a two-in-six-out topology, the DC-One is designed primarily for users of small- to medium-sized sound systems in both mobile and installed applications. While the unit is an all-new development based on a powerful SHARC processor, it is 100% compatible with all settings from other Electro-Voice signal processors, including the Dx38 - the best choice for achieving maximum performance with an EV loudspeaker system.

A large part of DC-One's development was aimed towards ensuring users can easily and fully utilize its serious digital horsepower and high-end audio performance. Though free PC-Editor software is available, the DC-One can easily be operated via the front panel. Direct access buttons, six predefined configuration modes (one being free configuration), straightforward output delay settings, and true professional metering all allow for safe operation.

DC-One's unique "front-panel-access-control" allows the user to select a personal library of accessible presets (out of 60 factory predefined output parameters) or editable (e.g. master EQ or delay settings).

The DC-One has a 1U 19" chassis that is deep enough to match typical amplifier depths, a front panel USB connector for the PC-Editor, and accepts either analogue or digital (AES-EBU) input signals; a 6dB input pad is available. The RS232 on the rear also provides eight contact closures for preset changes, or allows two units to be linked for larger systems. The PC-Editor software, as well as firmware updates allowing additional functions, will be available on www.electrovoice.com

Specifications

• Analog Inputs: 2 XLR (electronically balanced), 2 XLR THRU OUT (Electronically balanced)
• Digital Inputs: 1 XLR AES/EBU (2 ch.)
• Nominal Input Voltage: 1.23V/+4dBu
• Maximum Input Voltage: 8.7V/+21dBu (without -6dB Analog Pad Engaged)
• Nominal Output Voltage: 1.23V/+4dBu
• Maximum Output Voltage: 8.7V/+21dBu
• Input Impedance (balanced): 10k ohms
• Output Impedance (balanced): 50 ohms
• A/D Conversion: 24-bit Delta-Sigma
• D/A Conversion: 24-bit Delta-Sigma
• Sample Rate: 48kHz
• Data Format: 24-bit
• Internal Processing: 32-bit Floating Point
• Frequency Response: 10Hz-22kHz (+/-0.5dB)
• Dynamic Range: 111 dB (unweighted, band limited 22Hz-22kHz)
• THD+N: <0.01% (band limited 22Hz-22kHz)
• Control Protocol: Front Panel USB Connector
• Mains Voltage: 100-240 VAC
• Power Consumption: 25W
• Electronics Type: Processor
• Weight, Net: 10.14 lbs
• Dimensions (H x W x D): 1.75" x 19" x 14"

Our Part #  DC-ONE