Tannoy IW62TS
Subwoofer

The iw62TS is a high performance in-wall subwoofer. Designed to augment the low frequency output of an in wall system installation. It uses the same construction and mechanical installation method to ensure it is a perfect match, both acoustically and visually, to the full range units.

With a continuous power output rated at 200W RMS, this in-wall subwoofer is capable of delivering impressive results in large residential and commercial applications; such as small entertainment venues, restaurants, bars, public buildings, board rooms, AV installations and business music systems.

• Unique application flexibility – easy configuration possible for active, passive, mono, or stereo modes
• Designed to partner the Tannoy iw6 DS, iw6 TDC and iw62 TDC full-range in-wall loudspeaker products
• The two 6.5" bass drivers in the iw62 TS deliver effective low frequency reinforcement from 29Hz – 110 Hz in passive mode continuous power handling 200W RMS
• 2^nd order low pass crossover in passive mode – determined by external controller in active mode
• Simple and effective 8 clamp mounting system – self-aligning for easy installation and removal
• 4 spring loaded gold terminals – cut links to drive in stereo mode
• Ideally suited to larger installations where higher power premium performance in multi-room distrubuted audio and AV systems, small venues, restaurants, bars, business music systems and a vast array of other public building installations
• Grille and baffle can be painted to suit any décor

• System Type: In-wall subwoofer
• Frequency Response - 6dB: 29Hz-110Hz passive (determined by controller in active mode)
• Low Frequency Alignment - 6dB: 29Hz passive (determined by controller in active mode)
• Recommended Amplifier Power: 100 - 400W
• Power Handling: 200W (average), 400W (program), 800W (peak)
• Sensitivity 2.83 Volts @ 1 meter: Half Space: 94dB
• Maximum SPL@ 1 m: 117 dB (average), 123 dB (peak)
• Impedance: 8 ohms (stereo), 4 ohms (mono)
• Driver Complement: 2 x 165mm (6.50" ) drive units with long throw multifiber paper pulp cones

• Passive: 110 Hz
• Active: determined by controller

• Finish: White – paintable
• Dimensions (H x W): Front Baffle: 473.50 x 227mm (18.68 x 8.94"), Mounting Panel Thickness: 25mm Maximum
• Cut-out Dimensions (H x W): 426.1 x 187.6mm, (16.78 x 7.39")
• Rec. in-wall Mounting Volume: 30 litres, (1.1 cu.ft.)
• Mounting Depth: 95.50mm, (3.76")
• Weight (each): 6.5kg, (16.3lbs)
• Accessories: Pre-installation ring, Back can