Audio-Technica AT4040/SP
Sudio Pack with AT4040 and AT4041 Condenser Microphones

AT4040/SP

AT4040/SP Studio Pack includes:

• AT4040 side-address cardioid condenser microphone
• AT4041 cardioid condenser microphone
• AT8449 shock mount
• AT8405a stand clamp
• AT8159 windscreen
• Protective wooden storage case

The AT4040SP Studio Pack offers two of Audio-Technica’s renowned 40 Series studio condenser microphones: the AT4040 large-diaphragm side-address condenser and the AT4041 cardioid condenser. Each microphone is transformerless, resulting in exceptional transient response and extremely clean output signals; each is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. A shock mount, stand clamp and windscreen are included, along with a protective wooden carrying case.

AT4040 Side-address cardioid condenser microphone

• Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
• Externally polarized (DC bias) true condenser design
• Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
• Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
• State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
• Switchable 80 Hz hi-pass filter and 10 dB pad

AT4040 Specifications

• Element: Externally-polarized (DC bias) condenser
• Polar Pattern: Cardioid
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll-Off: 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: -32dB (25.1mV) re 1V at 1 Pa
• Impedance: 100 ohms
• Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D., 155 dB SPL, with 10 dB pad (nominal)
• Noise: 12 dB SPL
• Dynamic Range (Typical): 133 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 82 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 48V DC, 4.2 mA typical
• Switches: Flat, roll-off; 10 dB pad (nominal)
• Weight: 12.7 oz
• Dimensions: 6.69" long, 2.10" maximum body diameter
• Output Connector: Integral 3-pin XLRM-type

AT4041 Cardioid condenser microphone

• Smooth, extended frequency response with a slight rise occurring in the high-frequency region
• Ideal for drum overheads, acoustic guitar, piano, horns and under snare
• Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
• Switchable hi-pass filter and rugged turned-brass microphone housing

AT4041 Specifications

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll-Off: 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: -36dB (15.8 mV) re 1V at 1 Pa
• Impedance: 100 ohms
• Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
• Dynamic Range (Typical): 121 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 48V DC, 3.2 mA typical
• Switches: Flat, roll-off
• Weight: 4.2 oz
• Dimensions: 6.28" long, 0.83" maximum body diameter
• Output Connector: Integral 3-pin XLRM-type

Our Part #  AT4040/SP