The Audix MicroBoom is a 50-inch carbon fiber boom arm that attaches to any microphone stand. Designed as an accessory for the The Micros, The MicroBoom has a diameter of less than .3 inches (7.4 mm) and weighs in at only 2.5 ounces (70.8 grams). Carbon fiber, which is known for being lightweight, rigid, and durable, is now being utilized to fabricate parts for race bikes, motorcycles, formula one cars, aerospace , and the military. The MicroBoom, which can be used either in a horizontal or vertical position and is designed for use with any of the microphones in the Micros series.The upper end of the MicroBoom features a mini-XLR connector which securely holds the microphone in place and also allows for easy access when changing out microphones. High quality Mogami cable is used internally to insure the highest quality audio signal path between the microphone and the bottom of the boom, which terminates in a mini-XLR male connector. Designed to fit on any standard microphone stand (stand not included). The stand adapter designed for the MicroBoom allows for total control over the angle, rotation, and position of the carbon fiber rod. A metal thumbscrew locks the rod firmly in place. The final angle and position of the microphone is controlled by using the flexible metal gooseneck just below the microphone.

The M1245A is a miniaturized condenser microphone with a fully integrated preamp and detachable cable. The M1245A is available with cardiod and hypercardioid polar patterns giving the microphone the unique ability to be used a very wide variety of live, studio, and broadcast applications.

The M1245A is available with an array of clips and accessories enabling the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.

Supplied Accessories

• 25 ’cable with mini-XLRf - XLRm connectors (CBL-M12)
• Mic stand adapter (MC-MICRO)
• Hanging clip (MC-HANGER)
• Windscreen (WS1218)
• Carrying pouch

Features

• Small, lightweight, low profile
• Miniaturized integrated preamp circuitry
• No external power adapter needed
• 12mm gold vapor diaphragm
• Extremely low noise, high SPL handling
• Available with 2 polar patterns

Applications

• Acoustic instruments
• Ambient room miking
• Symphonic area miking
• Overhead mic for choir, group vocal
• Speeches / Presentations
• Cymbals / Percussion

Specifications

• Transducer Type: Condenser
• Frequency Response: 80Hz-20kHz
• Polar Pattern: Cardioid
• Output Impedance: 150 ohms
• Sensitivity at 1k: 7.8 mV/Pa (-42 dBV +/-1.5 dB)
• Recommended Load Impedance: >1000 ohms
• Signal/Noise Ratio (A-weighted): 73dB
• Equivalent Noise Level (A-weighted): 23dB
• Maximum SPL @ .5% THD: 144 dB
• Dynamic Range: 121 dB
• Power Requirements: 48-52V
• Connector: 3 pin mini-XLRm
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
• Housing/Finish: Brass/Powder coat
• Weight: .6 oz
• Length: 1.97"

Optional Accessories

• SMT-MICRO -Stand adapter with rubber insulated shock mount
• DCLAMP-MICRO -Lug mount adapted for hand percussion instruments with shock mount ring
• DVICE-MICRO -Drum rim mount attachment with shock mount ring
• MC20i -Clamp on clip for Saxophone with shock mount ring
• MGN-6 -6-inch gooseneck with base terminating in standard XLRm
• MGN-12 -Same as above in 12 inch length
• MGN-18 -Same as above in 18 inch length