JBL VRX918SP
18" High Power Powered Flying Subwoofer

VRX918SP

The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame.  In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.

Equally at home in ground stacked applications, the VRX918SP is equipped with a top-mounted, threaded, 20 mm socket that can receive the optional SS4-BK pole. This adjustable height pole can be used to mount speakers equipped with standard 36mm pole sockets and weighing up to 50 kg (100 lb). The threaded socket minimizes buzzing and rattling and assures that the pole will be secure and straight.

The enclosure is constructed of top quality birch plywood, coated in JBL’s rugged DuraFlex™ finish and is heavily braced to maximize low-frequency performance. The attractive CNC-machined, 16-gauge steel grille is internally lined with acoustically transparent foam to provide additional driver protection and give a very professional appearance. The rear of the enclosure is fitted with T-nuts which may be used to attach the optional WK-4S caster kit.

Key Features:

• Built-in JBL DrivePack DPC-2 amplifier module designed by Crown provides1500 Watts of peak power.  DSP based resident input module providessystem optimization, EQ and crossover functionality.
• 18", 2268FF dual voice coil, neodymium magnet Differential Drive wooferfor high-power capacity and light-weight.
• Integral rigging hardware fir simple connection of enclosures and optionalarray frame.
• 20mm threaded pole socket for solid, secure satellite speaker mounting.
• Large port area for reduced distortion.

Specifications:

• Frequency Response: 34 Hz - 220 Hz
• Frequency Range: 31 Hz - 220 Hz
• Maximum Peak Output: 126dB SPL peak
• DPC-2 Internal Amplification Output (at nominal load): 1500 WattsPeak, 750 Watts Continuous
• DPC-2 Output (Continuous IEC shaped pink noise into rated loadimpedance): LF: 750 Watts
• DPC-2 Output Section: LF: Dual Bridged Technology™, ClassD
• Audio Input connector: XLR with loop-through
• User Controls: Input Attenuator (0-16 dB), Selectable 80 Hz or120 Hz Low Pass, 80 Hz high-Pass enable/disable for XLR loop thru
• Signal Processing: DSP Based, resident in Input Module
• System Management: DSP based limiters for mechanical andthermal protection
• AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz
• AC Line Voltage: User Selectable; 120V/240V (-15%, +10%)
• AC Input Connector: Neutrik PowerCon (NAC 3MPA)
• AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
• AC Current Requirement: 6A per system at 120V, 3A per systemat 240V
• LF Driver: 1 x JBL 2268FF 457mm (18") Differential DriveWoofer
• Enclosure: Rectangular, 28mm
• Suspension/Mounting: Optional VRX-AF line-array-frame kit or10mm forged eyebolts.
• Finish: Black DuraFlex™ finish.
• Grille: Powder-coated, black, 16-gauge perforated steelwith acoustical transparent charcoal foam backing
• Dimensions (H x W x D): 20" x 23.5" x 29.5" (508 x 597 x749mm)
• Net Weight: 38.5 kg (85 lbs)
• Optional accessories: VRX-AF array frame, SRX718S-CVRPull-over padded cover (works with WK-4S), SS4-BK adjustable satellite speakerpole, WK-4S Caster kit

Our Part #  VRX918SP