RME HDSP-CARDBUS
PCMCIA Card

HDSP-CARDBUS

For the Hammerfall DSP I/O-boxes Digiface, Multiface and RPM, RME have developed a world-exclusive PCMCIA type II card in Zero wait state CardBus Busmaster technology. With up to 130 MB/s transfer rate in both directions the same basic performance is provided on a notebook as a PCI card would offer on a desktop computer. Additionally the card offers highest compatibility by being 100% Plug & Play compatible under Windows and Mac OS, and being able to share interrupts. The card itself will only use one interrupt (IRQ) for all functions (audio/MIDI.)

The connection between CardBus card and I/O-box is established using ordinary FireWire cable (6-pin IEEE 1394a). The data transfer does not use FireWire protocol, but a proprietary bus protocol by RME. The supplied cable has a length of 4.5 m (15 ft.), a cable length up to 10 m (33 ft.) has been tested successfully. The CardBus card does not provide power to the attached I/O-box. Therefore a compact and light-weight hi-tech switch-mode power supply is included.

The CardBus shown above ships since mid 2005. In case two HDSP CardBus shall be used in one laptop, the lower card must be a flat version, which is also available. It uses a special cable (15-pin Closed LAN to 6-pin IEEE1394a, included), with a length of 4.5 meters (15 ft.). The flat card is 100% identical and compatible, but does not offer the Secure BIOS technology of the upper version.

Specifications:

• PCMCIA type II, 32 bit CardBus card
• Zero wait state PCI Busmaster interface (130 MB/s transfer rate in both directions)
• Secure BIOS Technology: card stays fully functional even when the flash process fails
• Output: IEEE 1394 connector, RPM bus protocol
• Package contents: PCMCIA type II card, cable 4.5 meter (15 ft) (IEEE 1394),
  switch-mode power supply 100 V-240 V/12 V - 1.25 A, car cable, battery cable

Our Part #  HDSP-CARDBUS