Clear-Com KB701
Remote Speaker Station, Single Channel

KB701

The KB-701 remote speaker station connects to a single channel of party-line intercom, and operates in half-duplex mode, similar to a walkie-talkie. It features both an integral speaker and a flushmount electret microphone with mic limiter and a push-to-talk button. The station may be programmed via two internal dip switches to operate in four different modes, activated by other stations within the intercom system. The different operating modes are activated using the call signaling function of another station, which allows for individual control of the speaker and microphone.

Microprocessor-controlled logic and switching yields a feature-rich intercom station in a compact format. An electronic momentary-only talk button activates the talk function. Use the talk button or the reomote control from another station to activate the mic. A blue-colour LED indicates that the mic is on, while an amber-color LED indicates the mic is off. Mic sensitivity is selectable for either close or distant voice pickup.

The KB-701 offers both visual and audible call signaling, gaining the attention of the user when not at the station. A red-color LED lights when a call is activated on a connected intercom channel. A defeatable audible call signal, with level control, is also provided. Separate level controls are provided for intercom level and for balanced program input. A local program source may be fed to the station, allowing the user to monitor that source while remaining in contact on the intercom system. The balanced program input can also be used in conjunction with the stage-announce output of a main station to provide a paging interrupt. This would allow paging at the station even if the intercom volume control is turned down. In addition, the intercom volume control of the KB-701 can be internally set so that an incoming message would still be audible, even if the control was turned all the way down.

The KB-701 may be wall or console mounted in a standard 4-gang electrical box, or may be mounted in the optional V-Box for desktop, surface-mount, or portable applications. It may be used with the optional 4-wire or TW (two channels on a single mic cable) daughter boards. The station is powered by the intercom line or by a local power supply when used with the optional 4-Wire daughter board.

Features

• Single-channel, push-to-talk speaker station
• Four different modes of operation, internally programmable
• Microprocessor-controlled logic and switching
• Flush-mounted internal microphone
• Visual and audible call signaling, with bright LED indicator
• Balanced local program input with separate level control
• Optional TW and 4-Wire daughter boards provide additional flexibility
• Wall or console mount, or optional V-Box for portable or desktop use
• LED buttons for talk, listen, call, announce, link, all talk, or mic on.

Specifications

• Program Line Input
  Maximum Level before Clipping: >= 20dBu
  Input Impedance: >= 5K ohms
• Speaker Output
  Load Impedance: >= 4 ohms
  Max Output Level before 1% Distortion: 20dBu ± 2dBu
• Party Line Output
  Off Noise: < -74dBu
  Output Impedance: >10K ohms
• Party Line Input
  Crosstalk: < -60dB
  Max level before Clipping: >= 12dBu
• Frequency Response
  Program Input - Speaker Out: 200 - 18KHz ± 3dB
  Party Line - Speaker Out: 200 - 18KHz ± 3dB
• Max Distortion
  Program Input - Speaker Out: <= 0.5%
  Party Line - Speaker Out: <= 0.5%
• Noise
  Program Input - Speaker Out: < -60dBu
  Party Line - Speaker Out: < -50dBu
• Max Gain
  Program Input - Speaker Out: >= 24dB
  Party Line - Speaker Out: >= 40dB
• Power
  Input Voltage Range: 20-30 VDC
  Input Current (Idle): <= 90mA
  Input Current (Max): <=110mA
• Internal Connectors and Jumpers
  Intercom: Line Five terminal connector
  Program Input: Three terminal connector
  Option Switches: Three DIP switches
• Front Panel Controls & Indicators
  (1) Program level control
  (1) Intercom level control
  (1) Talk button
  (1) Call button
  (1) Integral microphone
• Environmental: 32 - 122 degrees F
• Dimensions (W x H x D): 8.5" x 4.5" x 1.75"
• Weight: 1.04 lbs

Our Part #  KB701