Yorkville AP812
12 Ch Powered Mixer 2 x 455 Watts @ 4 Ohms

AP812

The AP812 includes all of the power and features of the AP818 but with eight mono channels instead of fourteen. Channels 9 to-12 are configured in stereo with cueing switches and RCA inputs for disc jockey and/or live theater applications.

Patching includes switchable mains / monitor amp assignment along with enough inputs and outputs for external audio processing. Speakon™ and 1/4" phone jacks are rear-mounted for convenient speaker output. Inside, SilentFan™ cooling assures quiet, reliable performance. Other features include: Two assignable 9-band graphic equalizers, a 255-preset digital effects processor with footswitchable in/out, phantom power, effects return fader, headphone jack, two LED VU meters, easy access top-mounted input / output jacks, rubber-surround rotary knobs, smooth faders and an optional 19" rackmount kit.

Features:

• Internal Digital Reverb - 16 bit DSP with 255 presets
• Channel Gain, Three band EQ, Effects, Monitor Send, Pan, Fader & clip indicator
• Channels now include sweep midrange control
• Two full Stereo channels with 1/4" & RCA inputs, Cue switching for DJ/Theatre application
• Effects return on fader
• Effects return to monitors
• Phantom Power
• Selectable Headphone Monitoring
• Extensive Patching Capabilities
• Internal switching to reconfigure for stereo or main/monitor output operation

Specifications:

• Number of Channels 12
• Mono Channel EQ (ch.1 to 8) Low, Sweep Mid, High
• Stereo Channel EQ (ch. 9/10 & 11/12) Low, Mid, High
• Channel Effects All Channels
• Monitors Effects Yes
• Balance Controls 9 to 12
• Pan Controls 1 to 8
• Inputs - XLR (bal) Ch. 1 - 8
• Inputs - 1/4" Ch. 1 - 12
• Inputs - RCA (unbal) 2 Stereo Sets
• Clip /Mute LED All Channels
• Phantom Power 24 V + LED indicator
• VU Meter 2 x 5 LED
• Headphone Monitor Features Cue , Volume
• Internal Effects Digital 16 Bit; 255 Effects
• Effects Send 1 Internal/External
• Reverb / Effects Footswitch Yes
• Max Gain to Line Out -Mic Input (dB) +63
• Max Gain to Line Out -Line Input (dB) +45
• Master EQ -1 (type /Channels /Range - dB) Graphic / Mono / 9 Band 63 Hz - 16,000 Hz
• Master EQ -2 (type /Channels /Range - dB) Graphic / Mono / 9 Band 63 Hz - 16,000 Hz
• Main Outputs ( Line Level) 4 , 1/4 inch (TRS) 2 pre, 2 post EQ
• Main Amp Inputs (Line Level) 2 , 1/4 inch (TRS)
• Monitor Outputs (Line Level) 1, 1/4 inch (TRS)
• Outputs - Amp A - 1/4" Jacks 2
• Outputs - Amp A - Speakon 4-pin 1(Euro only)
• Outputs - Amp B - 1/4" Jacks 2
• Outputs - Amp B - Speakon 4-pin 1 (Euro only)
• Mixer - Signal to Noise Ratio (dB) greater than 100
• Mixer - Frequency Response (Tone and EQ Flat,+/-2dB) 20 Hz - 20,000 Hz
• Mixer - Input Referred Noise to line out, @ 150 Ohms (dBv) -117
• Mixer THD (Main out w/ -10dB input) less than 0.03%
• Amp A - Power Output @ 8 Ohms (0%1"THD, 1kHz) 240
• Amp A - Power Output @ 4 Ohms 455
• Amp B - Power Output @ 8 Ohms (0%1"THD, 1kHz) 240
• Amp B - Power Output @ 4 Ohms 455
• THD - 1kHz (dB) less than 0.03%
• THD - 20Hz-20kHz (dB) less than 0.1%
• Hum and Noise (un / Aweight -dB) -98
• Typical crosstalk -1 kHz (dB) -66
• Input Impedance - Bal/Unbal (Ohms) 22,000 - 12,000
• Input Sesitivity (Vrms Sine) 1.47 V
• CMRR @ 60Hz (min/typ) 54 dB / 66 dB
• Max Votage Gain (dB) 29
• Power Consumption (typ/max) 660 VA / 1200 VA
• Protection Thermal / Load / DC
• Cooling Variable Speed DC Fan
• Transformer Type Toroidal
• Finish Scratch Resistant Vinyl-Coated Aluminum
• Chassis Construction Steel
• Rackmount Yes (RK812)
• Other Features Selectable stereo mains or mono main & monitor.
• Dimensions (DWH, inches) 18 x 19 x 5.5
• Dimensions (DWH, cm) 45.7 x 48.3 x 14
• Weight (lbs/kg) 37 / 16.8

* Specifications subject to change without notice

Our Part #  AP812