Community VERIS26T

The VERIS 26T is a two-way, full-range loudspeaker system suitable for use in a wide range of constant voltage applications.

Its low-loss distortion internal auto-former provides the system designer with great flexibility. The four power taps allow a 9dB range of level control in 3dB increments.

The versatile 26T is ideal for distributed systems such as those found in cafes, restaurants, shopping centers and airports. With its powerful dual cone drivers, the VERIS 26T provides additional low frequency and mid-range output over that of its sister product, the VERIS 6T.

When paired with a subwoofer such as the VERIS 210S, a VERIS 26T system will produce high-fidelity, broad spectrum sound that belies its modest size.

In addition to distributed systems, the VERIS 26T is an excellent choice for anillary delay applications. When used to augment a FOH system in venues such as auditoria, theatres, and houses of worship, delay speakers can significantly even out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for underbalcony fill, overbalcony fill, or simply placed towards the rear of the seating areas. By deploying VERIS 26T loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation.

The VERIS 26T may be mounted to a wall or ceiling surface with a yoke bracket (included), suspended from its M6 threaded rigging points, or installed using an OmniMount Series 30 mounting device.

Applications

• Shopping Malls
• Airports
• Delay Fill
• Restaurants
• Pubs
• Cafes
• Houses of Worship

Features

• Internal Autoformer for 70V/100V installations
• Ferrofluid treated HF driver for improved heat dissipation
• Non-resonant, non-metallic HF diaphragm for reduced distortion
• Carbon ring cone technology provides 30% more piston area with increased excursion capability
• Terminal strip connection w/25W, 50W, 100W & 200W taps

Specifications

• Format: Two-way full-range, vented bass, trapezoidal, equipped with autoformer for 70V/100V systems
• Operating Range: 70Hz-18kHz
• Frequency Response: 90Hz-10kHz (+/-3dB)
• Dispersion (-6dB): 90 H x 70 V degrees (in vertical position)
• Crossover Frequency: 2 kHz
• Max SPL @ 1m: 114 dB continuous
• Sensitivity in SPL (1W/1m, free space): 91dB (125Hz-10kHz, 1/3 octave); 91dB (250Hz-4kHz, speech range)
• Max Power Handling: 200W RMS (70V/100V)
• Autoformer Taps: 25W, 50W, 100W, 200W
• Connectors: Terminal strip
• Low Frequency Transducers: Dual 6" 150W RMS, 375W Program, 8 ohm
• High Frequency Transducer: 3/4" 50W RMS, 125W program, 8 ohm
• Enclosure: Trapezoidal (22.5 degree included angle), 11-ply cross-laminated birch
• Finish: Black catalyzed polyester paint
• Rigging Provisions: (9) M6 threaded rigging fittings, (4) M6 threaded fittings for OmniMount 30 bolt pattern; yoke bracket included
• Grille: Powder coated steel, black
• Dimensions (H x W x D): 22.5" x 9.8" x 10.1"
• Net Weight: 26.5 lbs