ADAM Audio SUB-20

The Sub20 is meant to reproduce LFE or other low frequency signals above 25Hz in medium sized or larger control rooms.

It is equipped with 2 long throw 10“ drivers that are mounted at the opposite sides of the cabinet. Due to this alignment the forces applied to the cabinet are opposite to each other and consequently compensate themselves, so that the cabinet stays much quieter than with conventional arrays. Distortion is drastically reduced that way, the clarity of the signal is improved especially at higher levels.

There are 2 downfiring bass reflex tubes that because of their size and construction successfully avoid ventilation noise.

Specifications

• Woofers: 2 x 10"
• Free Air Resonance: 25Hz
• Cone Material: Coated Paper
• Built-in Amps: 2 x 200W (sin), 300W (RMS)
• Frequency Response: 25Hz (-3dB) - var. 50-150Hz
• THD at 100dB SPL: </=1%
• Max Peak SPL in 1m half-space: >/=121dB SPL
• Variable Low Pass Filter: 50 to 150 Hz
• Satellite High Pass (switchable): 85Hz
• In- and outputs: XLR symmetrical, RCA non-symmetrical
• Input Impedance: 10k ohms
• Weight: 84 lbs
• Magnetically Shielded: no
• Dimensions (W x H x D): 32" x 22" x 12"
• Warranty: 2 years