ADAM Audio SYSTEM110

With the continued growth of the small project studio, the demand has grown for compact monitoring systems capable of incredible accuracy while simultaneously delivering full range sonic reproduction. With that in mind, ADAM Audio combines the diminutive S1A (the smallest S-series monitor) in a package with their highly successful Sub 10 subwoofer to bring you the state-of-the-art ADAM Audio System 1-10.

Intended for musicians, engineers and producers working in a restricted space, the System 1-10 boasts an incredible 25Hz-35kHz frequency response. The system has a special bass management section built into the subwoofer, allowing it to be fine-tuned to any listening environment. The power and quality of the Sub 10 subwoofer assures deep, full low-end reproduction, while the S1A satellite supplies the system with ADAM Audio's signature ART folded ribbon driver, yielding a smooth, crystal clear top end complimented perfectly by tight and accurate mids and low-mids from its 5" Hexacone driver.

In addition to the project studio, possible applications include post production/sound editing bays, DAW setups and mobile recording facilities. The ADAM Audio System 1-10 - guaranteed to set a new standard for 2.1 subwoofer/satellite setups.

S1A
The S1 and S1A nearfield monitors are the smallest units using ADAM's Advanced Ribbon Technology. Equipped with a 5" HexaCone woofer and the A.R.T. tweeter, the active version starts reproduction at 40Hz (-3dB) and delivers astounding sonic performance, even with very complex material (typically a weak point with small monitors). Adding the airiness and accurate spatial information from the A.R.T. tweeter, the S1 and S1A are the premier choice for mobile recording facilities and DAW setups. Together with a subwoofer (Sub 10), superb stereo or 5.1 monitoring can be obtained within a limited space.

Sub10
Very low frequencies can be reproduced with the Sub10 subwoofer. A special long throw 10" bass unit is tuned in a bass reflex enclosure to a corner frequency of 23Hz (-3dB) and combined with a 200W RMS power amplifier to deliver an impressive low end without boominess or compression. With a larger cabinet volume, extended low frequency response is possible with less equalization, thereby placing less taxing power demands on the amplifier and enabling more natural and acoustically convincing performance.

The amplifier comes with both RCA and balanced XLR connectors. In order to adapt the Sub10 to different satellite loudspeakers, it is possible to limit the high frequency output of the subwoofer with the variable low pass filter, and to independently roll off the low frequency output of the satellites using a variable high pass filter. To make these crossovers as musical as possible, ADAM Audio has used variable frequency 24dB/octave Linkwitz-Riley filters.