Fat Pro Technologies FADB1

The only direct box made that operates on 9V battery, 48V phantom power and 120V AC. Single channel active direct box with instrument, line, and speaker level input selector. High Z unbalanced input and output connectors and balanced output connector, all gold plated. Typical battery life is approximately 400 hours. Includes "battery on" flashing indicator. 3 year warranty.

Features

• Flat response, +0/-2dB from 20Hz to 20kHz
• Exceptionally low noise, -126dB EIN, signal to noise-110dB
• Low distortion, less than .004%
• 2.2 Meg ohm input impedance guarantees full responseand maximum sustain from all types of pickups
• No transformers, transformers have input impedance'sof 50k ohms or lower, this causes less drive, distorted bass, hi-end roll-offand loss of sustain of instrument pickups
• Wide dynamic range, handles up to 5.6V P-P inInstrument Position with 9V battery and 10V RMS when using 120 VAC or 48Vphantom power
• RF protection on input and output
• Operates on 120VAC, 9V battery and 48V phantom power
• Switchable ground isolation, unique circuitry keepsentire box grounded to mixer or amplifier main ground, only input ground islifted
• On/Off switch turns off 9V battery, disconnecting theinput will also turn off the power
• Flashing power on LED lets you know when you forgetto turn it off
• Long battery life, typically 600 hours from one 9Vbattery
• Three position input switch guarantees maximum signalto noise
• Designed and packaged to be indestructable
• All markings on top of unit
• Full three year warranty

Specifications

• Frequency Response: +0/-.02dB 20Hz-20kHz
• Bandwidth: +0/-3dB 2Hz-200kHz
• Noise: 20Hz/20kHz -116dB
• Distortion: 20Hz-20kHz 0.005%
• Maximum Input: Instrument: 2.3V RMS/+7.2dBv; Line:12V RMS/+21.6 dBv; Speaker: 120V RMS/+41.6 dBv
• Gain: Instrument: -15 dBv; Line: -30 dBv; Speaker:-50 dBv
• Input Impedance: Instrument: 2 MEG ohms;Line/Speaker: 22k ohms
• Input Connectors: 1/4" phone jack
• Output Load Impedance: Bal. - P2 to P3 = 600 ohms;Unbal. P2 or P3 to P1 = 300 ohms
• Output Connector: 3-pin XLR
• Output Phase: Pin 2 pos./Pin 3 neg./Pin 1 gnd.
• Channels: One
• Dimensions (H x W x D): 1.73" x 5.1" x 3.4"
• Weight: 1 lb

TMGR# FADB1