Audio-Technica ATW-1813D
Camera-Mount UHF Wireless System with Body-pack and Plug-on Transmitters, Lavalier Microphone, 655.500 to 680.375 MHz

ATW-1813D

Includes:

• ATW-R1810 Single Channel Receiver
• ATW-T1801 UniPak Body-Pack Transmitter
• ATW-T1802 Plug-On Transmitter
• Lavalier Microphone

With UHF reception (996 frequencies user-selectable in 25 kHz steps), Audio-Technica’s new 1800 Series camera-mount wireless microphone systems provide extremely flexible, professional, and easy-to-use portable wireless solutions. The 1800 Series is available in dual-channel and single-channel systems.

For simultaneous operation of two microphones, dual-channel 1800 wireless systems include the ATW-R1820 dual receiver with two completely independent receiver channels in a single unit. Dual balanced outputs enable signals to be mixed, or independently assigned to each output. Independent audio level controls provide flexible audio mixing and monitoring possibilities.

For those using a single microphone, the single-channel 1800 Series systems include the ATW-R1810 single-channel receiver.

1800 Series wireless systems come equipped with a choice of plug-on and body-pack transmitters. The ATW-T1801 UniPak™ body-pack transmitters feature a professional locking 4-pin connector compatible with all Audio-Technica Wireless Essentials® microphones. The ATW-T1802 plug-on transmitters feature a locking XLR connector for adapting dynamic and condenser microphones. Both transmitters offer selectable high and low transmission modes to conserve battery life/maximize power.

Additional 1800 Series features include automatic frequency scanning, Tone Lock™ squelch, back-lit LCD, soft-touch buttons, headphone monitor output with independent level control, and durable metal construction.

Features

• Two completely independent receiver channels in a single unit, for simultaneous operation of two microphones (dual-channel systems)
• Compact receiver is easy to mount on a camera
• UHF reception with 996 frequencies selectable in 25 kHz steps
• Automatic frequency scanning for easy selection of open channels
• Tone Lock™ squelch system eliminates interference when transmitter is off
• Two independent balanced outputs (dual-channel systems)
• Headphone monitor output with independent level control
• Battery fuel-level indicators on transmitters and receiver
• Soft-touch controls for easy frequency selection
• True Diversity operation for resistance to multi-path interference and dropouts
• LCD frequency and battery status display with backlight
• Antenna and AF Peak LED indicators
• Dual-channel receiver can operate in single-receiver mode to extend battery life when only one audio channel is in use (dual-channel systems)
• Transmitters operate in low or high transmission modes to conserve battery life/maximize power
• Easy, user-friendly operation
• Clear, natural sound quality
• Powered by AA batteries
• System components of the 1800 Series and 3000 Series Wireless Systems can be used interchangeably (Note: The 1800 Series offers UHF wireless operating frequencies in 25 kHz steps, while the 3000 Series offers UHF wireless operating frequencies in 125 kHz steps. This means that not every frequency selectable on 1800 Series components will be selectable on the 3000 Series components. Be certain to set each Transmitter-Receiver pair to identical frequencies.)

Overall Specifications

• Operating Frequencies: UHF Band D: 655.500 to 680.375 MHz
• Number of Channels: 996 total per band (25kHz increments)
• Frequency Stability: +/-0.005%, Phase Lock Loop frequency control
• Modulation Mode: FM
• Normal Deviation: +/-10kHz
• Operating Range: 300' typical
• Frequency Response: 70Hz to 15kHz

ATW-R1810 Receiver Specifications

• Receiving System: Dual independent RF sections, automatic-switching diversity
• Image Rejection: >50 dB typical
• Signal-to-Noise Ratio: 104 dB at 30 kHz deviation (A-weighted), maximum modulation 37 kHz
• Total Harmonic Distortion: <1% (±10 kHz deviation at 1 kHz)
• Sensitivity: 25 dBµV, (S/N 60 dB at 5 kHz deviation, A-weighted)
• Audio Output (balanced): 27 mV (at 1 kHz, ±5 kHz deviation)
• Output Connector: 3-pin mini XLR (TA3M-type)
• Monitor Headphone Output (typical): 35 mW max., 32 ohm load
• Monitor Headphone Jack: 3.5 mm TRS, signals on both Tip and Ring
• External Power Requirements: 12V DC nominal, 500 mA
• Batteries (not included): Four 1.5V AA alkaline
• Current Consumption (battery): 315 mA typical
• Battery Life: 10 hours typical, depending on battery type and use pattern
• Dimensions (W x H x D): 2.95" x 4.92" x 1.25"
• Net Weight (without batteries): 10.5 oz
• Accessories Included: Two flexible UHF antennas; one 18" TA3F to XLRM output cable; belt pouch

ATW-T1801 UniPak Transmitter

• RF Power Output: High: 30 mW; Low: 10 mW, nominal
• Spurious Emissions: Under federal regulations
• Dynamic Range: >105 dB, A-weighted
• Input Connections: High impedance, low impedance, bias
• Batteries (not included): Two 1.5V AA alkaline
• Current Consumption: High: 180 mA; Low: 160 mA, typical
• Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
• Dimensions (W x H x D): 2.60" x 3.43" x 0.94"
• Net Weight (without batteries): 2.8 oz

ATW-T1802 Plug-on Transmitter Specifications

• RF Power Output: High: 30 mW; Low: 10 mW, nominal
• Spurious Emissions: Under federal regulations
• Dynamic Range: >105 dB, A-weighted
• Input Connector: 3-pin locking XLRF-type
• Microphone Power: Provides power to condenser microphones rated to operate on 12V phantom power or less
• Batteries (not included): Two 1.5V AA alkaline
• Current Consumption: High: 180 mA; Low: 160 mA, typical
• Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
• Dimensions: 1.57" x 4.37" x 1.57"
• Net Weight (without batteries): 7.0 oz

Our Part #  ATW-1813D