Audio-Technica ATW-R1810D
Wireless Microphone Camera-Mount Receiver, Single Channel, UHF Band D 655.500-680.375 MHz

ATW-R1810D

• Single channel UHF wireless microphone receiver
• UHF Band D: 655.500 to 680-375 MHz, 996 total channel per band (25 kHz increments)
• Frequency Stability: +/-0.005%, Phase Lock Loop frequency control
• Modulation Mode: FM
• Normal Deviation: +/-10kHz
• Operating Range: 300' typical
• Operating Temperature Range:  23° F to 113° F
• Frequency Response: 70Hz to 15kHz
• Receiving System: Dual independent RF sections, automatic-switching diversity
• Image Rejection: >50dB typical
• Signal-to-Noise Ratio: 104dB at 30kHz deviation (A-weighted), maximum modulation 37kHz
• Total Harmonic Distortion: <1% (+/-10kHz deviation at 1kHz)
• Sensitivity: 25 dBµV, (S/N 60dB at 5kHz deviation, A-weighted)
• Audio Output: Balanced: 27 mV (at 1kHz, +/-5kHz deviation)
• Output Connector: 3-pin mini XLR (TA3M-type)
• Monitor Headphone Output (typical): 35mW max., 32 ohm load (per channel)
• Monitor Headphone Jack: 3.5mm TRS, signals on both Tip and Ring
• External Power Requirements: 12V DC nominal, 500 mA
• Batteries: Four 1.5V AA alkaline (not included)
• Current Consumption: 350mA typical
• Battery Life: 10 hours typical (depending on battery type and use pattern)
• Dimensions (W x H x D): 2.95" x 4.92" x 1.25"
• Net Weight: 10.5 oz (without batteries)
• Accessories Included: Two flexible UHF antennas, 18" TA3F to XLRM output cable; belt pouch

Our Part #  ATW-R1810D