Crown CM30-CROWN-RESTOCK

The Crown CM-30 is a professional-quality, supercardioid condenser microphone designed for inconspicuous miking of a choir, orchestra or stage. Nearly invisible and with a built-in (removable) hanger for easy positioning, the CM-30 is the choice for church choir and overhead stage miking. Smooth, wide-range response makes the CM-30 ideal for natural reinforcement or recording, while its ultratight supercardioid pattern provides impressive gain-before-feedback while rejecting unwanted noise and reverb. Electronics for the CM-30 attach straight to a rectangular electrical box. Accepts phantom power and includes 30' cable and electronics. Available in black or white versions.

• Type: Unidirectional condenser
• Transducer: Electret condenser
• Frequency Response (typical): 40 Hz to 20,000
• Polar Pattern: Supercardioid
• Impedance: 150 ohms, balanced. Recommended minimum load impedance 1000 ohms.
• Open Circuit Sensitivity: 10 mV/Pa (–40 dB re 1 volt/Pa)
• Power Sensitivity: –37.5 dB re 1 mW/Pa
• Equivalent Noise Level: 28 dB SPL typical (0 dB = 0.0002 dyne/cm2), A-weighted
• S/N Ratio: 66 dB at 94 dB SPL
• Maximum Sound Pressure Level: 120 dB SPL produces 3% THD
• Input Connectors: Screw terminals
• Output Connectors: Screw terminals
• Operating Voltage: Phantom power, 12 to 48 volts DC, positive voltage on pins 2 and 3 with respect to pin 1 of output terminal
• Current drain: 4.5 milliamperes
• Materials: Brass housing, steel faceplate
• Finish: Black microphone, white faceplate
• Weight (microphone and cable): 4 ounces (113 grams)
• Weight (microphone, cable and circuit): 7.5 ounces (212 grams)
• Cable: Black, 30-ft (9.15-m) 2-conductor shielded 0.1-in. (0.254-cm) diameter cable from microphone to electronics; none supplied for electronics output. Use 2-conductor shielded microphone cable.
• Dimensions (microphone only): .530" (1.3 cm) diameter, 1.446" (3.7 cm) length
• Included Accessories: WS-5 windscreen (black)

TMGR# CM30-CROWN-RESTOCK