FOR-A Corporation FA-395A/AP

The FA-395A/AP Time Base Corrector & Frame Synchronizer supports multi-format video input/output, as well, analog and digital audio input/output.

Features:

• Analog composite, analog component and digital component video input/output available.
• Analog audio and digital audio input/output available.
• Analog and digital audio embedding/de-embedding over video signal capability.
• RS-232C / RS-422 / GPI control capability.
• Built-in recursive noise reducer.
• Built-in color bar generator.
• Available mono-color setup mode.
• Analog and digital audio level control.
• Analog delay control.

Specifications:

• Standard: FA-395A: 525/60 (NTSC) or FA-395AP: 625/50 (PAL)
• Video Input:
     * Analog composite: 1.0Vp-p, 75O, 1 ea., BNC
     * Analog component: Y: 1.0Vp-p, PBPR: 0.757Vp-p, 75O, 1ea., BNC (BETACAM or M II level selectable)
     * Digital component: 270Mbps, 75O, 1ea., BNC (w/ Active loop-through)
• Genlock Input: BB: 0.429Vp-p (NTSC) / 0.450Vp-p (PAL), 75O or loopthrough, 1ea., BNC
• Video Outputs:
     * Analog composite: 1.0Vp-p, 75O, 3ea., BNC
     * Analog component: Y: 1.0Vp-p, R-Y, B-Y: 0.757Vp-p, 75O, 1ea., BNC (BETACAM or M II level selectable)
     * Digital component: 270Mbps, 75O, 2ea., BNC
• Internal Processing: 4:2:2 component
• Correction Range: 2 fields (field inversion prevented)
• Sampling Frequency: Y: 13.5MHz, C: 6.75MHz
• Quantization: 10-bit
• Frequency Response:
     * NTSC: 100KHz - 4.2MHz ±0.5dB; 4.2MHz - 5MHz: -1dB; roll off above 5MHz
     * Y: 100kHz - 4.2MHz ±0.5dB, 5MHz - 0.5dB
     * PBPR: 100kHz - 2.5MHz ±0.5dBk roll off adove 2.5MHz
     * PAL: 100kHz - 5MHz ±0.5dB; 5MHz - 5.5MHz; -3dB roll off above 5.5MHz
     * Y: 100kHz - 5MHz ±0.5dB, roll off above 5.5MHz
     * PBPR: 100kHz - 2.5MHz ±0.5dB, roll off above 2.5MHz
• DG / DP: 1.5% / 1° (APL 50%)(composite)
• S/N Ratio:
     * 56dB (without quantization noise)(composite)
     * 60dB (without quantization noise)(component)
• K Factor (2T Pulse): 1% (composite), 1% (component)
• Process Control:
     * Video Level: -3dB - +3dB / Chroma Level: -3dB - +3dB
     * Setup Level: -15IRE - +15IRE / Chroma Phase: -30° - +30°
• Noise Reduction: 4 step levels (motion adaptive filtering performed)
• Audio I/O: 
     * Digital: AES/EBU format unbalanced, 75O, 2ch (audio 4-track) 1.0Vp-p, 2ea., BNC
     * Audio level control: Level variable range: ±20dB each for selected analog, digital input signal (4ch each, 0.1dB step)
     * Analog: AES/EBU format unbalanced, 75O, 2ch (audio 4-track) 1.0Vp-p, 2ea., BNC
• Input Impedance: 600 ohm or High impedance switch setting
• Quantization: 20 / 24-bit (selectable)
• Sampling Frequency: 48kHz
• Frequency Response: 20Hz - 50Hz; ±0.5dB, 50Hz - 15kHz; ±0.3dB, 15kHz - 20kHz; ±0.5dB
• S/N Ratio: 70dB or higher (when +24dB, 1kHz input level)
• Distortion: less than 0.05% (when +24dB, 1kHz input level)
• Audio level control:
     * Input level: 0dB, +4dB, +8dB, -4dB, -10dB
     * Output level variable range: ±10dB for digital audio level. (operate in a stereo pair, 1dB step)
• Connection Terminals: Terminal block 12 poles x 2 (I/O), 3.5mm pitch between terminals
• Usable wiring: AWG16 - 28
• Audio Delay: 4ms - 200ms ±1ms (2-ms variable steps)
• Interfaces:
     * RS-232C/422 (selectable): 1 ea., 9-pin D-sub (male)
     * GPI: 1 ea., 9-pin D-sub (female)
     * Control: 1 ea. (IN / OUT), BNC
• Temperature / Humidity: 10ºC - 40ºC / 30% - 90% (no condensation)
• Power / Consumption: 100VAC - 240VAC ±10%, 50/60Hz / Approx. 80VA (79W)
• Dimensions (W x H x D): 424 x 44 x 350 mm (1 RU)
• Accessories: Operation manual / AC cord / Rack mount brackets
• Options: FA-350RU Remote Control Unit / Panel Cover / Rack Bracket Set

TMGR# FA395A