Kramer WP-220
Wall Plate, Computer Graphics & Video Line Amplifier w/Audio

WP-220

The WP-220 is a line driver for computer graphics video with resolutions from VGA through UXGA and higher and composite video, each with stereo audio signals. It provides controls to compensate for signal losses inherent in long cable runs.

• High Bandwidth - 500MHz (-3dB) for 15-pin HD and 490MHz (-3db) for composite video.
• HDTV Compatible
• Advanced Sync Processing - Ensures compatibility with a wide range of computers.
• Front Panel Connections - 15-pin HD (PC) with 3.5mm stereo Audio and RCA for composite video with 2 RCAs for stereo Audio inputs.
• Rear Panel Connections - 5 BNCs for the computer graphics signals, terminal blocks for the composite video signal, and Balanced stereo terminal blocks for each stereo Audio signal.
• Level (Gain) and EQ (Peaking) Controls.
• Audio Level Controls - Left & Right for stereo Audio on 2 RCAs
• Wall Plate Size - Single gang.

Specifications:

• INPUTS: VIDEO: 1 XGA analog red, green, blue signals: 0.7 Vpp/75 Ohm, H and V sync, TTL level, on an HD15F connector
  1 composite video 1 Vpp/75Ohm on an RCA connector
  AUDIO: 1 PC unbalanced stereo audio on a 3.5mm mini jack
  1 unbalanced stereo line audio on RCA connectors
• OUTPUTS: VIDEO: 1 RGBHV on 5 BNC connectors 0.7 Vpp/75 Ohm, RGB TTL level syncs 1 composite video 1 Vpp/75Ohm on 2 Pins
• MAX. OUTPUT LEVEL: VIDEO: 2Vpp
  AUDIO: 7Vpp
• BANDWIDTH (-3dB): VIDEO: XGA: 500MHz, Fully Loaded; CV: 490MHz, Fully Loaded
  AUDIO: >100kHz
• DIFF. GAIN: XGA: 0.07%
  CV: 0.05%
• DIFF. PHASE: XGA: 0.04 Deg.
  CV: 0.05 Deg.
• K-FACTOR: XGA: 0.1%
  CV: <0.05%
• S/N RATIO: XGA: 75.1dB
  CV: 76.7dB
  AUDIO: 76.84dB
• CROSSTALK (all hostile): VIDEO: XGA: 63.6dB
  CV: 64.5dB
  AUDIO: –91dB
  CONTROLS: VIDEO: XGA EQ.: 0dB to +4.5dB @ 50MHz
  CV Level: –1.2dB to +6dB
  CV EQ.: 0dB to +1.4dB @ 4.43MHz
  AUDIO: Line level: –70dB to +6.2dB
• COUPLING: VIDEO: XGA / CV: DC
  AUDIO: AC at input; DC at output
  AUDIO THD + NOISE: 0.028%
• AUDIO 2nd HARMONIC: 0.012%
• POWER SOURCE: 12 VDC, 145mA
• DIMENSIONS: 2.72"W x 1.97"D x 4.49"H (6.9cm x 5.0cm x 11.4cm)
• WEIGHT: 0.67 lbs. approx (0.3 kg)
• ACCESSORIES: Power supply

Our Part #  WP-220