Yamaha DSP5D

The DSP5D provides essentially all the functionality of a PM5D-RH minus the control surface in a rack-mountable unit that can be seamlessly controlled from a PM5D (RH) console. In terms of I/O capacity and processing capability the DSP5D offers:

• 48 mono and 4 stereo inputs
• 24 Mix buses, 8 Matrix buses
• 24 Omni Outputs
• Full channel functionality: gain, EQ and filters, dynamics, sends
• 8 effect processors and 12 graphic equalizers
• 2 Mini-YGDAI expansion card slots
• Full compatibility with DSP5D Editor computer software
• The ability to function as a remote stage box via the DCU5D DigitalCabling Unit

Up to two DSP5D units can be used with a single PM5D console. A PM5D plus one DSP5D gives you 4 input fader layers, with a total of 96 mono and 16 stereo input channels, while adding two DSP5D units to a PM5D provides 6 layers with 144 mono and 24 stereo input channels to comfortably handle large-scale applications. And of course your processing power is doubled or tripled, respectively. Like the PM5D itself, all analog inputs and outputs are directly accessible via standard XLR type connectors.

After a few simple connections the DSP5D becomes an integral part of the PM5D console, and can be controlled from the PM5D control surface in the same way as the internal functions. So although you have significantly upgraded the system, you can simply plug in your sources and output devices and use it right away without having to work through another learning curve.

Specifications:

• Internal:
   processing 32bit Accumulator=58bit)
• Sampling frequency rate:
   Internal: 44.1kHz, 48kHz, 88.2kHz,96kHz
   External: Normal rate 44.1kHz(-10%) to48kHz(+6%)
   Double rate 88.2kHz(-10%) to 96kHz(+6%)
• Signal delay:
   Less than 2.3ms (INPUT to STEREO A@48kHz)
   Less than 1.15ms (INPUT to STEREO A @96kHz)
• Total harmonic distortion (Input Gain=Min).:
   CH INPUT to STEREOA, B
   Less than 0.05% 20Hz to 20kHz @+4dB into 600ohms (@Sampling frequency=44.1kHz, 48kHz) Less than 0.05% 20Hz to 40kHz @+4dB into 600ohms (@Sampling frequency=88.2kHz, 96kHz)
• Frequency response:
   CH INPUT to STEREO OUT
   0, +0.5, -1.5dB 20Hz to 20kHz @+4dB into 600ohms (@Sampling frequency=44.1kHz, 48kHz) 0, +0.5, -1.5dB 20Hz to 40kHz @+4dB into 600ohms (@Sampling frequency=88.2kHz, 96kHz)
• Dynamic range (maximum level to noise level):
   110dB, DA Converter (OMNI OUT), 108dB @ 48kHz; 106dB @ 96 kHz, (AD+DA to OMNI OUT)
• Hum & noise:
    level -128dB Equivalent Input Noise 20-20kHz, Rs=150ohms, Input Gain=Max -86dB residual output noise. OMNI OUT
• Crosstalk (@1kHz):
    80dB adjacent input channels(CH1-48)80dB input to output