Jensen Transformers JT-II-FLCF

This transformer is designed for high performance line output stages. The 50% nickel alloy core gives it excellent distortion and level handling at a cost allowing many applications to enjoy the advantages of an output transformer. Driving signals should be free of DC and source impedance kept as low as possible.

• 1:1 Bifilar windings
• Distortion 0.035% type at 20 Hz and +4 dBu output level
• Wide bandwidth: -3 dB at 0.2 Hz and 15 MHz
• Drives 600 Ohm loads to levels up to +21 dBu at 20 Hz
• Excellent time domain performance: DLP 0.3E type 20 Hz to 20 kHz
• Insertion loss only 1.6 dB when driving 600 Ohm load
• No Faraday shield