Krix has risen to the challenge of delivering high quality outdoor sound reproduction within a marine grade waterproof, all weather enclosure. Internal ribs reinforce the UV-stabilsed polymer housing to minimise panel resonance. Special treatment beneath the Mylar tweeter's dome improves high frequency response, while the bass driver is given a pre-determined operating range within the fully sealed cabinet, delivering fast, punchy bass. The speaker is fitted with an aluminium grille and mounting bracket, plus marine grade stainless steel hardware to protect against corrosion.

Frequency Range: 70Hz - 20kHz on wall response

Power Handling: Maximum 80 watts RMS amplifier power. Polyswitch protection has been installed for the tweeter

Sensitivity: 87dB for 2.83 volts at 1 metre

Configuration: 5 inch 2-way

Bass Driver(s): Nominal 130mm (5") polypropylene cone with rubber surround. 25mm (1") high temperature voice coil wound on a radial vented kapton former

Tweeter: 22mm (1") specially damped mylar dome with phase plug. Ferro fluid cooled

Crossover Points: 3kHz

Impedance: Nominally 8 ohms

Enclosure Type: Sealed and gasketed waterproof trapezoid enclosure with internal bracing. Injection moulded with UV stabilizing

Dimensions: 250mm high x 185mm wide x 190mm deep

Finish: Painted satin white or black, with aluminium grilles. NB: Image shows logo badge with vertical orientation. Product is supplied with horizontal orientation as standard.

Input Terminals: 5 way hand tightened binding posts, nickel plated

Weight: 2.5kg each including bracket

Mounting: Adjustable ‘U’ shaped aluminium bracket