RSS by Roland S4000S-0832

40 Channel I/O modular rack configured to be used at the Front of House position for connection to mixing console with ordinary XLR cables. The configuration would be used with an S-4000S-3208 at the stage position. 8 input + 32 output.

Specifications:

• Number of Channels:
  8 in 32 out
• AD Conversion:
  Sample Rate: 96.0 kHz
  Signal Processing: 24 bit
• DA Conversion:
  Sample Rate: 96.0 kHz
  Signal Processing: 24 bit
• Frequency Response:
  -2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz)
• Total Harmonic Distortion + Noise:
  0.05 % or less (Pad: On, Input Gain: +4 dBu, 22 to 20000 Hz)
• Dynamic Range:
  110 dB
• Cross Talk:
  -80 dB
• Nominal Input Level:
  -65 to -10 dBu (PAD: Off) -45 to +10 dBu (PAD: On) (1 dB step, Max. +28 dBu)
• PAD:
  20 dB On/Off
• Input Impedance:
  20 k ohms
• Nominal Output Level:
  +4 dBu, Max. +22 dBu
• Output Impedance:
  150 ohms
• Recommended Load Impedance:
  10 k ohms or greater
• Residual Noise Level (IHF-A, typ.):
  -90 dBu
• Equivalent Input Noise Level (E.I.N.):
  -128 dB
• Network Latency:
  375 microseconds when using REAC cable only (AD - REAC - DA Latency: about 1.2 ms)
• Connectors:
  Input: 8 (XLR type, balanced, phantom power, 4 ch input module x 2 )
  Output: 32 (XLR type, balanced, 4 ch output module x 8 )
  REAC: MAIN, BACKUP (RJ-45 EtherCon type)
  Remote Connector: 1 (RS-232C, DB-9 type)
  MIDI Connectors: IN, OUT (5-pin DIN type)
• Indicator:
  EXT Indicator (External Power Supply Unit)
  INT Indicator
  REAC Indicator
  CTRL Indicator
  ALARM Indicator
  MUTE ALL OUTPUTS Indicator
• AC Power Supply:
  AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
• DC Power Supply:
  +24 V (from optional external power supply unit : S-240P)
• Phantom Power:
  +48 V / 14 mA (each input on SI-AD4, remote controlled)
• Operation Temperature:
  0 to +40 degrees Celsius +32 to +104 degrees Fahrenheit