Sound Advance Systems ST2432D3D7-TEGULAR

ST2432D Overview:

The Sound Advance ST2432D SpeakerTile is a remarkable combination of wide bandwidth, wide dispersion, and a highly-refined aesthetic presentation designed for commercial installations. They are available in several mounting options, allowing them to be easily installed into standard T-bar suspended ceiling systems, replacing a standard 2’x2’ ceiling tile. The white Expanded PolyStyrene front surface of the speaker tile allows models to be optionally finished on-site with any water-soluble finish, such as latex paint, or covered with light wallpaper, fabrics and selected texture coats.

Patented Planar Diaphragm Technology™ allows a ST2432D that has been installed in a suspended ceiling to radiate sound in a 140 degree hemispherical pattern with smooth, even coverage. This allows them to be spaced further apart than a narrow-dispersion conventional speaker, reducing the total quantity of loudspeakers required in almost any installation.

The ST2432D is a two-way, full-range device that utilizes a crossover centered at 1,200 Hz with 12 dB per octave slopes for both low-pass and high-pass sections. The ST2432D is transformer-coupled, with the following input taps: .5W, 1W, 2W, 4W, 8W, 16W, 32W and 8-ohm bypass. They are recommended for 9/16" or 15/16" T-bar suspended ceiling systems, either indoor or in weather-protected outdoor.

• Frequency Response: 40Hz – 19kHz +/- 4dB
• Power Rating: 75 W RMS
• Pressure Sensitivity: 92 dB, 1W/1m
• System Impedance: 8 ohms nominal, 5.5 ohms minimum
• Transformer: Primary Voltage: 70.7V
• Primary Taps: .5, 1, 2, 4, 8, 16, 32W; 8 ohm bypass
• Dimensions (HxWxD): 16" x 23-7/16" x 3"
• Product weight: 11 lbs
• Shipping weight: 15.5 lbs