Rode S1-B
Handheld Condenser Mic for Live Vocal Performance, Black (Silver shown)

S1-B

The S1 is designed specifically for ‘no compromise’ live vocal performance, but has also found a place in the studio where the performer wants to hold the recording mic!

The S1 utilizes a true condenser transducer for studio quality sound reproduction. The S1’s sophisticated high pass filter dramatically reduces undesirable low-frequency background and handling noise. The super cardioid pick-up pattern further limits background noise and virtually eliminates feedback.

The multi-stage mesh head filters breath, wind, and plosive noise without affecting sensitivity or frequency response. The hardened mesh head also protects the precision transducer from the rigors of live performance. The rugged ergonomic design of the S1 makes it extremely comfortable to hold and control during use.

The S1 requires P48 V phantom supply. The high level output of the S1 is electronically balanced to reduce loss over long cable runs.

Features:

• Studio recording quality.
• Rugged all metal construction.
• Attractive satin-nickel finish.
• Heat treated high strength mesh head.
• Custom designed integral ‘plosive’ screen.
• Ergonomically weighted & balanced.
• Low noise circuitry.
• Low handling noise.
• Complete with stand mount & zip pouch.
• Designed & manufactured in Australia.
• Full 10 year guarantee

Specifications:

• Acoustic principle: Externally polarised condenser,pressure gradient transducer
• Directional pattern: Supercardioid
• Frequency range: 20 Hz ~ 20 000 Hz
• Equivalent noise: 18 dBA SPL (per IEC651, IEC268-15)
• Maximum SPL: 151 dB (@ 0.7% THD into 1kO)
• Sensitivity at 1 khz into 1 kO: -46.5 dB re 1Volt/Pascal (4.7 mV @ 94 dB SPL) +/- 2 dB into 1kO
• Maximum output voltage: +12.5 dBu (@ 0.7% THD into1kO)
• Dynamic range of the mic. amplifier DIN/IEC 651: 132dB (per IEC651, IEC268-15)
• Power (Supply voltage): Phantom supply voltage - 44Vto 52V; Current consumption - 4.4 mA
• Polarity: A positive acoustic pressure applied to thediaphragm results in a positive voltage excursion at pin 2 with respect to pin3 at the output XLR connector.
• Connector: XLR 3F
• Weight approx.: 300grm
• Dimensions (L x Dia.): 7.2" x 2.05"

Our Part #  S1-B-RODE