Beyerdynamic MC930-STEREO-SET
Stereo Pair of Small Diaphragm Condenser Microphones, Cardioid, Includes Suspension Mounts, Windscreens and Case

MC930-STEREO-SET

Includes:

• 2 x Stereo-paired MC 930 Cardioid Condenser Microphones
• 2 x Elastic Suspensions (EA 19/25)
• 2 x Windscreens (WS 53)
• Transport Case

This high-quality, universal condenser microphone features an exceptional price/performance ratio. Critical features of the MC 930 are the wide frequency response of 40 - 20,000 Hz and a signal-to-noise ratio of 71 dB.

The MC 930 is suitable for micing choirs, orchestras and solo instruments. Due to the switchable pre-attenuation of 15 dB it provides excellent performance at high sound pressure levels. The switchable bass roll-off filter with 6 dB/octave at 250Hz compensates for proximity effects.

With the WS 101 wind screen the MC 930 can be used for stage vocal applications.

The MC 930 is phantom powered (11 - 52 V) and is suitable for live applications and installations.

Due to its cardioid polar pattern, the MC 930 has a high-gain-before feedback and eliminates noise from the rear. It is not only a first-class tool for studios, but also for sound contracting systems, where excellent sound and maximum gain-before feedback is required.

Exceptional XY stereo recordings may be achieved by using two MC 930 microphones.

Features

• True condenser microphone
• Cardioid polar pattern for universal applications
• Very low self-noise, extraordinary signal-to-noise ratio
• Very high SPL capability (140 dB)
• Switchable pre-attenuation (15 dB)
• Switchable low-pass filter
• Rugged and compact construction (metal housing)
• Supplied with microphone clamp and zipper bag

Specifications (per mic)

• Transducer Type: True Condenser
• Operating Principle: Pressure gradient
• Frequency Response: 40 - 20,000 Hz
• Polar Pattern: Cardioid
• Open Circuit Voltage at 1kHz (0dB = 1V/Pa): 30mV/Pa
• Nominal Impedance: 180 ohms
• Load Impedance: 1000 ohms
• Max. SPL at 1kHz: 125 dB (with pre-attenuation: 140 dB)
• Signal to Noise Ratio rel. to 1 Pa: 71 dB
• A-weighted equivalent SPL: 16 dB
• Bass Roll-off Filter: Switchable, 6 dB/octave at 250 Hz
• Power Supply: 11 - 52V
• Current Consumption: 4.6 mA
• Connection: 3-pin XLR male
• Dimensions:
  Length: 128 mm
  Diameter: 21 mm
• Weight without cable: 115 g

Our Part #  MC930-STEREO-SET