FEATURES

• Channel 1 Level Control is a 41 detent potentiometer allowing adjustment from infinite attenuation to 0dB attenuation in 40 steps.
• Status LED Panel: From top to bottom: One red clip indicator per channel, one yellow signal present indicator per channel, one green power on indicator per channel, one red protection indicator per channel, one red thermal overload indicator per channel and one yellow standby indicator per channel
• Channel 2 Level Control is a 41 detent potentiometer allowing adjustment from infinite attenuation to 0dB attenuation in 40 steps. Level control can be bypassed from the rear panel.
• AC Mains Circuit Breaker will protect the amplifier agains excessive current draw.
• Channel 2 Speakon® Connector: Used to coneect speaker to channel 2. Speaker wire should be connected to pin 1+ and pin 1- within the mating connector.
• Input Connectors: An XLR connector and a 0.25" TRS connector are provided for each channel. Within the channel the XLR and TRS connectors are wired in parallel.

PERFORMANCE : Referenced to 4 ohm rated power (117 VAC line voltage)

• THD + N: <0.5% at rated power (8 ohm), 20-20kHz <0.5% at rated power (4 ohm), 20-20kHz 1% at rated power (2 ohm), 1kHz 1% at rated power (4 ohm), bridged 1% at rated power (8 ohm), bridged
• IMD (SMPTE/DIN Method) : <0.2%, 60Hz/7kHz, 4:1, 35Vpeak at 4 ohm
• Dynamic Headroom : 1.5dB above rated power
• Power Bandwidth : 20 Hz to 20 kHz at 4 ohm and 8 ohm loads
• Frequency Response : 20 Hz to 20 kHz +0dB/ -1dB
• Signal to Noise : 100dB A-Weighted referenced to rated power @ 4 ohm, (20kHz BW)
• Crosstalk : -70dB, 1kHz referenced to rated power @ 4 ohm
• CMRR : >70dB at 1kHz
• Sensitivity for rated power : 0.775Vrms or 1.55Vrms (Selectable)
• Input Impedance : 50kWbalanced
• Input Overload : 20dBu
• Protection : Thermal, Short Circuit, Over-Current & Over-Voltage
• Stability : Unconditionally stable into reactive loads at 1/3 rated power output
• Duty Cycle : Continuous operation at 1/3 rated power, 40ºC/104ºF

POWER REQUIREMENTS : Mains Voltage (output power rated at nominal voltage):

• 100vac, (50-60Hz) ±10%
• 117vac, 60Hz ±10%
• 234vac, 50Hz ±10%
• Mains Power Consumption Ratings
• Maximum Consumption@ rated power
• 1kHz sine wave, 4 ohm:

REGULATORY COMPLIANCE

• ETL/US, ETC/C: UL6500 2nd Edition, CAN/CSA - E60065
• FCC part 15, class B
• CE Certification: EN55103-1, EN55103-2, IEC60065

PHYSICAL

• Cooling Method: Variable speed ultra quiet fan cooling
• Operating Environment: -10 degrees C to 40 degrees C, up to 85% RH
• Storage Environment: -40 degrees C to 70 degrees C, up to 93% RH

DIMENSIONS & WEIGHT

• Xi2600 5.25" H (3U) x 19" W x 17" D
• 133mm x 483mm x 432mm
• Net Weight: 55lbs / 24.9kg
• Shipping Weight: 65.5lbs / 29.7kg