AJA Video Systems Inc D10CEA
DA Audio/Video Converter, SDI/Embedded Audio to Component or Composite Video and 4 Ch Bal/Unbalanced Audio

D10CEA

NOTE: Power supply not included.

The D10CEA converts SDI video with embedded audio to component or composite analog video and 4 Channel balanced analog audio. The video outputs can be configured as YPbPr (Betacam or SMPTE/EBU-N10), RGB, composite or YC (S-Video). The analog audio outputs can be wired in a balanced or unbalanced configuration. The 4 audio channels can be selected from group 1-4. Audio and video output connections are available on a 25 pin "D" subminiature connector (breakout cable supplied). All video/audio configuration is done by external dipswitch selection. This versatile, low-cost, miniature monitoring solution also outputs two re-clocked loop-thru SDI outputs.

Features

• Digital to Analog Audio and Video Converter
• SDI with Embedded Audio Input
• Component or Composite Video Outputs
• 4 Channel Balanced Audio Output
• 2 Re-Clocked, Loop-Thru SDI Outputs
• Selectable Audio Channel Pair/Group

Specifications

Inputs

• SDI (SMPTE 259M) w/Embedded Audio, 1x BNC

Outputs

• Video: YPbPr - SMPTE, EBU-N10, Betacam, RGB, NTSC, PAL, YC (S-Video)
• Audio: 4 Channel Balanced/Unbalanced
• Video/Audio Outputs on 25 Pin D Connector
• 2 SDI Re-Clocked Loop-Thru, 2x BNC

Frequency Response

• Video, +/- .25dB to 5Mhz, Audio, +/- .5dB to 20Khz

User Controls

• External Dipswitch
• Video Format
• Pedestal
• H/V Blanking
• Audio Group 1 - 4
• Audio Level, -14, 0, +2, +4 dBu

Power

• 5VDC Regulated, 4 Watts

Size

• 5.8" x 3.1" x 1" (147 x 79 x 25mm)
  

Our Part #  D10CEA