Kamesan KS6002
4-Channel EQ / Compressor Module for Kamesan Mixers

KS6002

If processing is desired, the KS-6002 can be used to insert a 2-band EQ and 2:1 compressor on each channel of the KS-342 or the KS-6001. The KS-6002 will insert the effects into the unit stacked directly below it. The switchable 2-band EQ provides variable low frequency adjustment from 200 Hz - 3.2 kHz, and high frequency adjustment from 1.2 kHz - 15 kHz. Its compressor features a 2ms fixed attack time and 200ms release time. 4 threshold controls on the side of the unit provide individual threshold settings for each channel.

The KS-6002 snaps on to the KS-342, offering quick attach and quick release capability. A multipin connector pops out of the top (or bottom) of the unit, allowing audio and power to pass from the KS-342. No additional batteries or wires are needed. The KS-342CC carry case also expands to accommodate the expansion unit.

Specifications:

• Equalizer:
     * Type: 2 band, peaking
     * Frequency response: Low band 200Hz~3.2kHz, High band 1.2kHz~15kHz
     * Control Range: +/-12dB
• Compressor:
     * Threshold Level: -2dB~+10dB continuously variable
     * Attack time: Approx 2mS
     * Release time: Approx 200mS
     * Ratio: Approx 2:1
• Functions: 
     * Equalizer Bus Switch
     * Compressor indicator: Green: Compressor on, Orange: Gain Reduction
     * Compressor link switch: ch1>ch2 link function, ch3>ch4 link function
• Performance:
     * Frequency Response: 50Hz~15kHz within ±1.0dB
     * S/N Ratio, (MIC-70): better than 54dB (22kHz L.P.F/RMS)
     * S/N Ratio, (LINE+4): better than 67dB (30kHz L.P.F/RMS)
     * Distortion (THD), (LINE): <0.5% (at +4dBm output 50Hz~15kHz, 10Hz~80KHz Filtered Output )
     * Distortion (THD), (MONI): <0.5% (at 0dBs/50Hz~20kHz, 10Hz~80KHz filtered/50 Ohm load)
• Power: supplied by the KS342 Mixer  
• Input Power: Approx 140mA (max 200mA) EQ/COMP/ON
• Operating Time (Continuous) on batteries connected to the KS 342:
     * More than 3 Hours (Alkaline Batteries)
     * More than 6 Hours (NP-1 NiCd)
• Dimensions (W x D x H): 8.46" x 5.63" x 1.58" (215 x 143 x 40 mm)
• Weight: 1.76 lbs. (0.8 kg)

Our Part #  KS6002