Kamesan KS6001
Sub-Mixer, 4-Channel Expander for KS-342

KS6001

If more mixing channels are needed, the KS-6001 submixer module can be added. This provides 4 additional channels that are functionally identical to the 4 channels on the KS-342, except for the M-S matrix. The submixer signal can be routed either to the stereo mix, or the aux monitor feed. The KS - 6001 may be used with the Kamesan KS - 432 mixer, or may be operated with a DC power source or external rechargeable battery pack (up to 16 V output).

The KS-6001 snaps on to the KS-342, offering quick attach and quick release capability. A multipin connector pops out of the top (or bottom) of the unit, allowing audio and power to pass from the KS-342. No additional batteries or wires are needed. The KS-342CC carry case also expands to accommodate the expansion unit.

Specifications:

• Input:
     * Input Level, (MIC): -70 ~-30dBs (Continuously Variable/Balanced) x 4
     * Input Level, (LINE): -20 ~ +4dBm (Continuously Variable/Balanced) x 4
     * Input Impedance, (MIC): 1.2kOhm
     * Input Impedance, (LINE): 600 Ohm
     * Headroom: Better than 30dB (Pre-fader input)
• Aux. Output: 
     * Output level: -20dBm (7P Cannon Connector, Balanced Output)
     * Output Impedance: 600 Ohm
     * Maximum Output: +8dBm (600? load at 12V)
• Frequency Response: 50Hz~15kHz within ±1.0dB
• S/N Ratio, (MIC-70): better than 55dB (30KHz L.P.F/RMS)
• S/N Ratio, (LINE+4): better than 67dB (30KHz L.P.F/RMS)
• Distortion (THD), (LINE): <0.5% (at +4dBm output 50Hz~15kHz, 10Hz~80KHz Filtered Output )
• Distortion (THD), (MONI): <0.5% (at 0dBs/50Hz~20kHz, 10Hz~80KHz filtered/50 Ohm load)
• Power: supplied by the KS342 Mixer, DC power source, or rechargable battery pack
• Input Power: Approx 105mA (max 200mA)
• Operating Time (Continuous) on batteries connected to the KS 342:
     * More than 3 Hours (Alkaline Batteries)
     * More than 6 Hours (NP-1 NiCd)
• Dimensions (W x D x H): 8.46" x 5.63" x 1.58" (215 x 143 x 40 mm) 
• Weight: 2.42 lbs. (1.1 kg)

Our Part #  KS6001