DPA Microphones 4028
Compact Wide Cardioid, Connector

4028

The DPA 4028 is a phantom powered (P48) compact condenser microphone using the same type of cartridge as the 4015-TL wide cardioid microphone, but is preamplified using a build-in ultra-small thick-film mounted FET-preamplifier.

The 4028 has a standard LEMO-connector for simple and safe mounting and removal of the microphone and is designed for usage together with the elegant and flexible Compact Active Poles for Flamingo floor stands or table shock mounts. The 4028 in conjunction with our Flamingo Stand is an ideal low profile solution for the audio engineer as well as the set designer.

The linear on-axis frequency response together with the extremely smooth off-axis response makes the DPA 4028 the optimal choice in live situations in front of both the non-professional and the professional performer. For a conference panel, a few 4028s will easily cover the participants.

The Microphone is supplied with a 3 m cable Lemo to XLR.

Specifications:

• Principle of operation: Pressure gradient
• Cartridge type: Pre-polarised condenser Type DMM0058
• Power supply: Phantom P48
• Frequency range, ± 2 dB: On-axis: 40 Hz ±2 dB to 20 kHz +3/-2 dB in 60 cm distance with a max. 3 dB soft boost at 10 - 15 kHz.
• Directional characteristics: Wide Cardioid
• Equivalent noise level A-weighted: Typ. 20 dB(A) re. 20 µPa
• Sensitivity, nominal, ±2 dB: Nominally 7 mV/Pa (at 1 kHz)
• Equiv. noise level ITU-R BS.468-4: Typ. 25 dB (max. 28 dB)
• Capsule diameter: 19 mm
• Total harmonic distortion (THD): 110 dB SPL peak (<0.5% THD)
• Output impedance: <300 Ohm
• Cable drive capability: Up to 100 m (328 ft) after XLR connector
• Microphone length: 30 mm; 71 mm incl. Connector
• Max. SPL, peak before clipping: 145 dB SPL peak
• Weight: 33 g (without cable)
• Operating temperature range: -10 to +55 °C (+14 to 131 °F)
• Cable length: 3 m
• Current consumption: 2.60 mA

Our Part #  4028-DPA