Audix ADX218 18" Gooseneck Microphone

Audix ADX218
18" Gooseneck Microphone

View all Audix products

Audix ADX218

The ADX212/218 are professional miniature condenser microphones designed for speech and vocal applications in live sound and broadcast. Most commonly used for pulpits, podiums, board room meetings, and teleconferencing, the ADX212/218 mics feature dual flexible goosenecks at both the base and top of the system, allowing for maximum positioning capabilities.

With a smooth uniform response over a frequency range of 40 Hz – 18 kHz, the ADX212/218 microphones provide a warm, rich sound not typical of microphones this size. The stock microphone employs a cardioid capsule, however, these microphones are also available with a hypercardioid capsule (ADX212-HC, ADX218-HC).

The ADX212/218 may be permanently installed into a podium or table top by using the flange mount adapter provided or the optional SMT1218R rubber insulated shockmount system. The ADX212/218 may also be used with the optional ATS-10 heavy duty table stand featuring a lighted on-off switch.

Metal housings for the ADX212/218 are fabricated from high quality aluminum and brass and finished with a nonreflective durable e-coat. The capsule, FET assembly, and preamp circuitry are all field-replaceable components. The ADX212/218 requires phantom power voltage (9-52 volts), however, if phantom voltage is not available, the optional Audix APS-2 phantom power supply is suggested. The ADX212/218 microphones can also be used with any standard mic stand by using the optional D-Clip to hold the base of the microphone.

Specifications:

Transducer Type: Condenser (pre-polarized)
Frequency Response: 40 Hz - 18 kHz
Polar Pattern: Cardioid
Output Impedance: 250 Ohms balanced
Open Circuit Sensitivity: 29 mV
Equivalent Noise Level: 28 dB (A weighted)
Signal to Noise Ratio: 66 dB (ref 1k @ 1 Pascal)
Power Requirements: 9 - 52v phantom
Maximum SPL: 120 dB
Cable/Connector: 3 pin gold plated male XLR connector
Polarity: Positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing: Machined Aluminum and Brass
Weight: 4.2 oz. (119 g)

	Windtech 1400-BLACK Microphone Windscreen, 3/8" Inside Diameter (Black) Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in 25 brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ... Usually ships in 1-2 business days List Price: $5.50 Our Price $5.43 Usually ships in 1-2 business days
	Windtech 1500-BLACK Microphone Windscreen, 3/8" Inside Diameter (Black) Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in 25 brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ... Usually ships in 1-2 business days List Price: $5.65 Our Price $5.63 Usually ships in 1-2 business days
	Audix SMT-1218R Shockmount Adapter for Audix ADX212 & ADX218 for Permanent Installation, Rubber Insulated Usually ships in 2-3 weeks Add to Cart to see Price Usually ships in 2-3 weeks Need it sooner? Call us!
	Audix D-CLIP D Series Mic Clip Heavy duty snap on clip with tension fit for D-Series, SCX series, ADX50 and TR40 microphones. Uses standard 5/8" threads and also includes a 3/8" thread adapter for European stands. Usually ships in 2-3 weeks Add to Cart to see Price Usually ships in 2-3 weeks Need it sooner? Call us!
	Audix ATS10 Desk Stand for Gooseneck Mics, for ADX112 and ADX118 Heavy duty, shock absorbent table stand for ADX112 and ADX118.For ultimate flexibility and portability, the optional ATS10 heavy duty table stand is ideal. Since the electronics for the ADX112/118 are built into the base of the microphone, ... Usually ships in 2-3 weeks Add to Cart to see Price Usually ships in 2-3 weeks Need it sooner? Call us!