Klein & Hummel O300DL
Active Tri-Amped Nearfield Studio Monitor (Left)

O300DL

NOTE: O300DR model shown above.

FEATURES:

3-way system design

• The most important part of the frequency spectrum is reproduced by a separate midrange driver
• Extremely low-distortion reproduction
• Exceptionally neutral sound stage from 40 Hz to 20 kHz
• No standing waves in the enclosure and no bass driver cone break-up

Unconventional enclosure concept

• Very compact enclosure constructed using ideal materials with excellent self-damping properties
• Structural resonances avoided using LRIM (Low Resonance Integral Molding)
• Very accurate bass reproduction due to sealed enclosure
• Acoustic centers of loudspeaker positioned on one plane
• Homogenous front baffle with no diffraction or acoustical discontinuities
• Wider effective listening area for main monitor when horizontally installed
• Modern-looking design with optional baffle cover/grill
• Extensive accessories allow for a multitude of installation possibilities
• Magnetically shielded for use next to CRT screens

Functional waveguide

• Wide horizontal directivity gives increased freedom of movement along the mixing console
• Narrow vertical directivity reduces the effect of early reflections off the console surface
• Perfect directivity pattern leads to a smooth power response

Advanced Electronics

• Integrated electronic limiter for each driver
• Active three-way crossover with 24 dB/oct. slopes
• Transformer balanced input equipped with special distortion reduction crossover function
• Power and overload/limiter-display integrated into the front panel K+H logo
• Controls adapt the monitor’s response to compensate for the roomlocation

O 300 D

• Additional 24-bit and 32-96 kHz digital input for AES/EBU, AES 3id and S/P-DIF
• Input connector for external Pro C 28 FIR digital controller
• Transformer balanced analog input

SPECFICATIONS:

Acoustical  

• Free field frequency response 1: 40 Hz - 20 kHz, ± 2 dB
• Free field frequency response 2: 35 Hz - 24 kHz, ± 3 dB
• Self generated noise level at 10 cm: < 20 dB(A)
• THD < 0,5% at 1 m distance from: 100 Hz @ 95 dB/ PL
• Max. SPL in half space at 3% THD in 1m: 112.8 db SPL
• Max. SPL averaged between: 100 Hz and 6 kHz

Electrical  

• Woofer amplifier, cont. output power (THD < 0.1%): 150 W
• Woofer amplifier, peak output power: 250 W
• Midrange amplifier, cont. output power (THD < 0.1%): 65 W
• Midrange amplifier, peak output power: 75 W
• Tweeter amplifier, cont. output power (THD < 0.1%): 65 W
• Tweeter amplifier, peak output power: 110 W
• Controller design: Analog, active
• Crossover - Frequency: 650 Hz / 3.3 kHz
• Crossover - Slope: 24 dB/oct
• Equalization - Bass: 0; -3; -6; -9 dB
• Equalization - Mid: +2; 0; -2; -4 dB
• Equalization - High: +2; +1; 0; -1 dB
• Protection circuitry: Limiter: low, mid, high
• Substronic filter: frequency/slope: 30 Hz; 6 dB/oct

Input (Analog) 

• Impedance, balanced floating: XLR, 14 kOhm
• Input sensitivity: -6 dBu
• Attenuator: 0 - 28 dB
• CMRR: > 60 dB @ 15 kHz

In-/Output (Digital)  

• XLR, (BNC): AES / EBU (AES3id, S/P-DIF)
• Impedance XLR: 110 Ohm, balanced floating
• Impedance BNC: 75 Ohm, non symmetrical
• Input switching: Analog/digital-left/mono/right
• Digital converter - resolution, design: 24 Bit DA, Delta Sigma
• Digital converter - sampling rate: 32 kHz - 96 kHz
• Displays, indicators - power on: K + H logo "red"
• Displays, indicators - limit / clip: K + H logo "blinking"
• Mains: 230 V; 120 V; 100 V AC
• Power consumption - idle: 18 W
• Power consumption - full output AC/DC: 240 W

Mechanical  

• Cabinet surface: Painted
• Color standard: Anthracite (RAL 7021), silver (RAL 9006)
• Special (add-on price): On request
• Baffle cover: Optional removable metal grille
• Drivers: Magnetically shielded
• Woofer: 8" (210 mm)
• Midrange: 3" (76 mm)
• Tweeter: 1" (25 mm)
• Mounting points: 2 x M8 on sides, rear panel bracket
• Dimensions: 10"H x 15.1"W x 11.4"D (253 x 383 x 290 mm)
• Net volume internal: 18.3 liters
• Weight: 30.8 lbs (14 kg)

Our Part #  O300DL