Kramer WP-211DS
Wall Plate, 2x1 Computer Graphics & Stereo Audio Standby Switcher, Twisted Pair Transmitter

WP-211DS

The WP-211DS is a high performance switcher for computer graphics video signals with resolutions ranging from VGA through UXGA and higher, and unbalanced stereo audio signals. When configured as a standby switcher, it will switch to the secondary input upon loss of the primary input.

• High Bandwidth - 300MHz (-3db)
• HDTV Compatible
• Automatic Standby Switching - It will switch from secondary input to primary input when a signal is detected
• Power Connect™ System - Only one unit in a system, the transmitter or the receiver needs to be connected to a power source. All the system units must have the Power Connect system to use this feature.
• Front Panel Connections - Dual 15-pin HD and dual 3.5mm inputs
• Rear Panel Connections - Terminal block outputs for stereo audio, contact closure control, and RGBHV and Twisted Pair for computer graphics video.
• Looping Input - Input 1
• Control - Automatic or contact closure switching and output disconnect with LED status indicator
• ID Bit Control
• System Range - CAT 5 up to 100 meters (320’)
• Twisted Pair Cable - UTP (unshielded twisted pair) such as CAT 5.
• Wall Plate - 3 gang

Specifications:

• INPUTS: 2 XGA on HD15F connectors
  2 unbalanced stereo audio on 3.5 mm mini audio connectors
• OUTPUTS: 1 XGA (RGBHV) on a 10 PIN terminal block connector
  1 XGA on an HD15F connector (input #1 loop)
  1 unbalanced stereo audio on a 3 PIN terminal block connector
  1 CAT5 (for video) on an 8 PIN terminal block connector
• MAX. OUTPUT LEVEL: VIDEO: 1Vpp (XGA)
  AUDIO: 4dBm
• BANDWIDTH (-3dB): VIDEO: 260MHz (XGA)
  AUDIO: 20kHz
• DIFF. GAIN: 0.05% (XGA)
• DIFF. PHASE: 0.1% (XGA)
• K-FACTOR: 0.3% (XGA)
• S/N RATIO: VIDEO: 74dB
  AUDIO: 80dB
• CROSSTALK (all hostile): VIDEO: –59dB @ 100MHz
• CONTROLS: Contact closure remote control, input default selection switch, Image off button
• COUPLING: VIDEO: DC
  AUDIO: DC
• AUDIO THD + NOISE: 0.017%
• AUDIO 2nd HARMONIC: 0.005%
• POWER SOURCE: 12 VDC, 330mA
• DIMENSIONS: Belgium: 15.1cm x 8.0cm x 3.84cm (5.95" x 3.15" x 1.51"), W, H, D
  Germany: 15.1cm x 8.0cm x 3.84cm (5.95" x 3.15" x 1.51"), W, H, D
  England and Europe: 14.6cm x 8.6cm x 3.84cm (5.75" x 3.39" x 1.51"), W, H, D
• WEIGHT: 0.67 lbs. approx (0.3 kg)

Applications:

• Ideal for any system requiring automatic computer and presentation routing for computer graphics signals (up to UXGA and higher).

Our Part #  WP-211DS