Inter-M Americas Inc QD-4480

The QD-4240/4480/4960 are four-channel amplifiers capable of driving 4 ohm loads. Their clean sound quality makes them ideal for permanent installation in professional PA systems or for portable use for live performances.

Inputs are XLR/ TRS "Combo" connectors; outputs are via rugged five-way binding post connectors. Clip-limiters are supplied on each channel to help prevent distortion due to excessive signal levels. All units have soft-start protection circuitry and feature power, signal, protection, and clip indicators on the front panel.

For added versatility, they may be operated in stereo, dual mono or bridged mono mode. The quad series amplifiers are powered by 100-120VAC or 220-240VAC 50/60Hz (depending on country requirements) and are packaged in 3.5" (2RU) high rack mount enclosures.

Features:

• 120W @ 4 ohms per Channel
• Inputs: Balanced Combo Jacks
• Outputs: Five-Way Binding Posts
• <0.03% Total Harmonic Distortion
• Extensive Protection Circuitry
• Two-Speed Cooling Fan
• LED Indicators: Power, Signal, Protection, Clip
• Rack Mount (2RU)

Specifications:

• Power Output, 4 ohms (quad ch): 120W
• Power Output, 8 ohms (quad ch): 80W
• Power Output, 8 ohms (bridged mono): 240W
• Input Sensitivity (8 ohms, 1kHz): 0.775Vrms
• Input Impedance: 20kohms balanced
• Slew Rate (8 ohms, full swing): ±30V/µsec
• Frequency Response (±0.5dB): 20 Hz - 50 kHz
• THD: < 0.03%
• S/N Ratio: 105 dB
• Damping Factor (8 ohms, 1kHz): > 100
• Residual Noise: -85 dB
• Channel Separation (8 ohms, 1kHz): 80 dB
• Voltage Gain (4 ohms): 29 dB
• Power Source: 100-120VAC or 220-240VAC
• Power Consumption: 420W
• Weight: 41.5 lbs. (15.5 kg)
• Dimensions (W x H x D): 19" x 3.5" x 14.5" (482 x 88 x 369 mm)