Eventide Reverb 2016
Rack Mount Reverb w/ Dedicated Controls

Reverb 2016

Eventide's Reverb 2016 recreates the legendary reverb algorithms of  Eventide’s SP2016 – Stereo Room, Room Reverb and High Density Plate. Every aspect of the original effects has been duplicated including every detail of the user parameters.

While the algorithms are identical to the originals, the hardware implementation is state-of-the-art, with features that include a high performance 24 bit DSP, 24 bit analog audio I/O, digital I/O and MIDI interface.

The Reverb 2016 is built to reverb – it’s not a multi-effects box. It was designed from the perspective that reverb is used nearly always and warrants a dedicated box with an optimal user interface. The Reverb 2016 user interface is extremely easy-to-use, unbelievably cool and features dedicated controls for each of the effect’s parameters. The controls and display are intuitive. The panel controls are optimized for the studio and for live performance. Up to 99 user presets can be stored.

While recreating the original reverbs is the Reverb 2016’s raison d’etre, it also features brand new, enhanced versions of the originals. These “New” reverbs are not a breakthrough: they have the same basic structure of the originals but with more complex early reflections, higher density, and finer control of the parameters. The “New” reverbs represent the natural evolution of the development work that maxed out the array processing power of the SP2016.

Features:

• 6 Reverb effects and a dedicated user interface
• Recreates 3 original SP2016 reverb effects: StereoRoom; Room Reverb; High Density Plate
• 3 new enhanced versions of the originals
• Fast top level UI (one knob - one job) optimized forstudio and live performance
• Stores up to 99 user defined presets.
• Digital input/output (S/PDIF)
• Input kill switch, relay bypass switch
• Dual function footswitch input
• >98dB dynamic range
• 24 bit conversion
• MIDI in & out
• 20 Hz - 20 kHz +/-1dB
• Pro levels (+4 dB nominal) and connections (XLR and1/4”)
• Balanced/unbalanced input selection via rear panel,push button switch
• Universal internal power supply works anywhere

Audio Input:

• Connectors: 1/4" TRS phone jacks (2); XLR 3-wirebalanced (2)
• Impedance: +4dB/Bal switch position: 100k Ohms;-10dB/Unbal switch position: 50k Ohms
• Levels: +4dB/Bal switch position: -2dBu min for full scale, +20dBu max;-10dB/Unbal switch position: -14dBu min for full scale, +8dBu max

Audio Output:

• Connectors: 1/4" TRS phone jacks (2); XLR 3-wirebalanced (2)
• Impedance: 125 ohms, each side, balanced
• Levels: +18dBm max, full scale, balanced/unbalanced

Digital Input:

• Digital S/PDIF Input
• Sample Rate: 44.1kHz - 48kHz (downsampled to 40kHz)
• Connector: Coaxial, RCA type
• Digital Input is selected via front panel switch

Digital Output:

• Digital S/PDIF output
• Sample Rate: 44.1kHz or 48kHz with ext clock
• Connector: Coaxial, RCA type
• Digital output is always active at 44.1kHz when not using digitalinput

Specifications:

• Frequency Response: Dry 20Hz-20kHz, +/-1dB; Wet20Hz-16kHz, +/-1dB
• Dynamic Range: >90dB, 20Hz-20kHz, Non A-weighted
• Sample Rate: 40.0 kHz
• Conversion: 24 bits A/D, 24 bits D/A
• Throughput Delay: less than 2ms
• THD: <=.05%, 20Hz-20kHz
• Crosstalk: <=45dB below full scale
• Dimensions (W x D x H): 19" x 6" x 1.75"
• Weight: 9.5 lbs

Our Part #  REVERB-2016