Neutrik NC3MX-CC

The XCC XLR cable connector Series  with circumferential shield contact provides excellent RF-protection to transmit digital audio signals most efficient and reliable. This XLR features a coaxial ground spring and a coaxial hex crimp ferrule at the cable entrance for proper and reliable transition of the shield to the shell.

3 pole male cable connector, RF-protected, gold contacts

Cable O.D.: 5.4 - 6.2 mm
Crimp Size Shield: 6.5 mm (hex)

Features:

• 3 pole cable connector with a circumferential shield contact for best EMI protection
• XCCR coding ring to indicate digital AES signals included
• Rugged zinc diecast shell, long lasting and durable
• Chuck type strain relief system for secure clamping of cables
• Boot with rubber gland gives high protection against bending stresses

Electrical Specifications:

• Capacitance between contacts: = 4 pF
• Contact resistance: = 3 m ohm
• Dielectric strength: 1,5 kVdc
• Insulation resistance: > 2 G ohm (initial)
• Insulation resistance: > 1 G ohm (after damp heat test)
• Rated current per contact: 16 A
• Rated voltage: 50 V
• Shielding effectiveness: > 55 dB @ 1.3 GHz

Mechanical Specifications:

• Cable O.D.: 5.4 - 6.2 mm
• Crimp size: 6,47 Hex crimp (shield) acc. IEC 60803 (die designation E)
• Insertion force: = 20 N
• Withdrawal force: = 20 N
• Lifetime: > 1000 mating cycles
• Wire size: max. 2.5 mm²
• Wire size: max. 14 AWG
• Wiring: Solder contacts
• Locking device: latch lock
• Crimp tool: "6.5 mm Hex die (size "

Material Specificaitons:

• Boot: E" acc. To IEC 60803)"
• Bushing: Polyuretan
• Cap / Nut / Washer: Polyamide (PA6 15% GR)
• Contact plating: PA 6 15% GR
• Contacts: 0.2 µm Au hard alloy over 2 µm Ni
• Contacts: Brass (CuZn39Pb3)
• Insert: CuZn39Pb3, Ni plated
• Locking element: Polyamide (PA 6.6 30 % GR)
• Gasket: St3K32 (latch) / Ck 67 (spring)
• Shell: Zinc diecast (ZnAl4Cu1)
• Split sleeve: Nickel
• Color coding: Polyacetal (POM)
• Circumferential ground spring: CuSn6, Ni plated

Environmental Specifications:

• Flammability: UL
• Standard comppliance: UL 94 HB
• Savety requirements: IP 40
• Temperature range: Complies with IEC 68-2-20 °C
• Optical Fiber type: Manufacturing Standard IEC 61076-2-103