TC Electronic P2-LEVEL-PILOT

P2 is a Realtime Loudness Controller, Multiband Processor and Limiter designed for use in video and post production.

The unit features one-key set-and-forget operation, while keeping hundreds of presets and parameters available for a system installer or the station's audio engineer. Units are easily cloned, facilitating maintenance of a large studio complex.

Ease of use is combined with ultimate internal precision, so maximum audio quality is always obtained, even under non-ideal input conditions. Up to 8 presets can be recalled using GPI. For expert presetting and remote control, a PC can be used to adjust all parameters utilizing the Icon program included.

P2 comes pre-loaded with a wide variety of international standard presets to be used out of the box, or as starting points for further adjustments. Balanced and unbalanced AES/EBU I/O is standard, and outputs are always active. Sample rate conversion can be invoked when using digital inputs.

Analog I/O is standard and outputs are always active. The 24 bit converters are scaled in the analog domain, with scaling under preset control, to minimize noise and maximize headroom under all operating conditions.

Digital Inputs and Outputs

• Connectors: XLR (AES/EBU), RCA Phono (S/PDIF)
• Formats: AES/EBU (24 bit), S/PDIF (24 bit), EIAJ CP-340, IEC 958
• Output Dither: HPF TPDF dither 8-22 bit
• Word Clock Input: BNC, 75 ohm, 0.6 to 10 Vpp
• Sample Rates: 32 kHz, 44.1 kHz, 48 kHz
• Processing Delay: 0.5 ms @ 48 kHz
• Additional Delay: 0-400 ms at all sample rates
• Frequency Response DIO: DC to 23.9 kHz ± 0.01 dB @ 48 kHz

Sample Rate Conversion

• Type: Asynchronous
• Dynamic Range: 120 dB
• THD+N: -106 dB 44.1 to 48 kHz @ 1 kHz, -2 dBFS
• Input Rate Range: 31 kHz to 49 kHz

Analog Inputs

• Connectors: XLR balanced (pin 2 hot)
• By-pass: Through relay
• Impedance: 40 ohm (balanced)
• Max. Output Level: +26 dBu (balanced)
• Full Scale Output Range: -4 dBu to +26 dBu (balanced)
• D to A Conversion: 24 bit (1 bit, 128 times oversampling)
• D to A Delay: 0.57 ms @ 48 kHz
• Dynamic Range: >100 dB (unweighted), >104 dB(A)
• THD: -86 dB (0.005 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu)
• Frequency Response: 10 Hz to 20 kHz: +0/-0.5 dB
• Crosstalk: <-60 dB, 10 Hz to 20 kHz, typical –90 dB @ 1 kHz

EMC

• Complies with: EN 55103-1 and EN 55103-2 FCC part 15, Class B CISPR 22, Class B

Safety

• Certified to: IEC 60065, EN 60065, UL 6500 and CSA E65 CSA FILE #LR108093

PCMCIA Interface

• Connector: PC Card, 68 pin type 1 cards
• Standards: PCMCIA 2.0, JEIDA 4.0
• Card Format: Supports up to 2 MB SRAM

Control Interface

• RS232: 9 Pin SUB-D
• GPI, Pedal, Fader: 1/4 inch phone jack

General

• Finish: Anodized aluminum face and top plate. Plated and painted steel chassis development
• LCD: 56 x 128 dot graphic LCD-display
• Dimensions: 19" x 1.75" x 8.2"
• Weight: 5.2 lb.
• Mains Voltage: 100 to 240 VAC, 50 to 60 Hz - (auto-select)
• Power Consumption: < 20W
• Backup Battery Life: > 10 Years
• Warranty: Parts and labor, 1 year
  

TMGR# P2-LEVEL-PILOT