Bogen Communications WV150
Mixer/Amp, Wall-Mount, 8 Module Bays, 150 Watts

WV150

Bogen's Wall-Mount Power Vector modular amplifiers offer a wide range of power from which to choose from, with three models ranging from 100W to 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems.

Each model includes eight module bays for plug-in input modules and allows for up to four levels of priority between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level.

Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).

Features

• 100-, 150-, and 250-watt models, each with a large power reserve
• Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads
• 8 module bays
• Wide selection of advanced plug-in modules
• 2 module bays capable of handling signal processing plug-in output modules
• 4 levels of priority between modules
• 11-segment LED output level meter monitors the output level of the power amplifier with Peak and Average meter switch
• Adjustable output level limiter with limit indicator
• Tape output available on front of unit
• Optional front-mounted input combo jack with 1/4" stereo phone and female XLR capabilities
• Motorized master volume control can be remotely operated
• Bass and treble controls with center detent
• Two-color LED for each channel indicates input active/clipping
• Switch permits user to select either transformer-coupled or a direct low-impedance output
• Bass and treble control bypass switch (located in module bay 6)
• 125 Hz Lo-cut feature (switch located in module bay 6)
• 5-position barrier strip, with clamping washers, provides connections for speaker loads
• Master mute function overrides all audio from the mixer section of the amplifier
• Screw terminal for master mute and remote volume control functions
• Each of the 8 module bays has an associated independent volume control
• Remote volume control panel (RVCP) (sold separately)
• Requires flush-mount (Model BBF) or surface-mount (Model BBS) back boxes (sold separately)
• Requires front cover door (WMAD sold separately)
• UL and CSA listed

Specifications

• Power Output (RMS): 150W (200W typical, @ 1kHz/0.1%/4 ohms)
• Frequency Response
  Transformer: 45Hz-20kHz; 0/-2dB @ FRP
  Direct: 20Hz-20kHz; 0/-1dB @ FRP
• Distortion
  Transformer: 0.5% THD+N, Maximum, Full-rated bandwidth @ FRP
  Direct: 0.1% THD+N, Maximum, Full-rated bandwidth @ FRP
• Signal-to-Noise
  Fundamental: -94dB
  With Aux Module: -70dB
  With Mic Module: -60dB
  With Tel Module: -70dB
• Tone Controls
  Bass Frequency: 100Hz (+/-10dB minimum)
  Treble Frequency: 10kHz (+/-10dB minimum)
  Low Cut Frequency: 125Hz @ -6dB/octave
• Sensitivity: 0.4V (at backplane connector)
• Output Regulation: 2dB or better no load to full load
• Output Impedance
  Transformer-Coupled: 70V, 25V, 8 ohms; balanced or unbalanced
  Direct Coupled: 4 ohms unbalanced
• Tape Out
  Output Level: 4VRMS @ FRP
  Output Impedance: 50 ohms maximum
• Overload Protection: Electronic overload protection (auto reset)
• Thermal Protection: Thermistor attached to heat sink
• Line Fusing: Resettable circuit breaker
• Cooling: Thermally controlled 3-speed fan
• Power Consumption: 3.5A @ 120V AC, 60 Hz
• Dimensions: (W x H): 14 1/8" x 21"
• Weight: 29 lbs

Our Part #  WV150