Audio Engineering Assoc R92
Figure-Eight Ribbon Studio Microphone

R92

The R92 is a Large Ribbon Geometry microphone suitable for use by the most demanding audio professional or hobbyist. Features a reduced proximity bass boost and a excellent wind blast protection which makes it suitable for close micing (6-12 inches) of guitar amps, vocals, percussion, etc. In addition, the smooth high frequency response of the R88 transducer has been further extended in the R92, making the R92 a unique voice in the world of ribbon mics.

AEA has designed the R92 to have slightly different tones on the front and rear pickup lobes of the microphone. The front lobe of the R92 is the “crisp” side, offering exceptionally clean and realistic high end detail. The rear lobe is the “smooth”side, which has a bit of classic ribbon high end rolloff that can help to handle harsh transients in a very refined and flattering way. Just like its bigger brothers in AEA’s LRGTM microphone series, the bass reproduction of the R92 is very solid and extended to the lowest audible bass frequencies.

The R92 is designed with an integral elastic shock mount, featuring a unique mounting system that allows excellent flexibility of mic positioning. The mic ships with a two meter cable and a durable plastic carrying case.

Features:

• Large Ribbon GeometryTM transducer
• Solid bass and smooth treble response
• Fast, accurate transient reproduction
• Low self noise and high SPL capability
• Excellent off-axis frequency response
• Wide-band response from 20Hz to 20 KHz
• Distinct character of front and rear lobes

Specifications:

• Polar Pattern: Native bidirectional (figure-eight)
• Frequency Response: 20 Hz to 18 kHz (+/- 3 dB)
• Maximum SPL: >135 dB SPL peak
• Output Sensitivity: > -55 dBv/Pa
• Output Impedance: 270 ohms nominal
• Recommended Load: 1.2 K ohm or greater
• Powering: Not required or recommended
• Polarity: Pin 2 high
• Connector: XLR-3M wired to a 2 meter captive cable
• Includes durable plastic case with foam interior
• Operating manual for proper care and usage.
• Ribbon Thickness: 1.8 microns ( .0000018 meter ) of pure aluminum
• Ribbon Width: 4.7 mm
• Ribbon Length: 59.7 mm

Our Part #  R92