Switchcraft 188
Heavy Duty 1/4" Phone Plug

188

Features:

• Switchcraft's 188 is more heavy-duty than our competitor's biggest 1/4" commercial phone plugs.
• Large curved tip solder terminal makes it easier to solder to heavy gauge wires.
• Longer sleeve terminal allows more room to make sleeve solder connections.
• Extra-large cable clamp securely grips cable of up to .450" in diameter.
• Will easily accommodate some varieties of four conductor 14 gauge wire and parallel two conductor 12 gauge wire.
• Bendable tab on sleeve terminal makes termination easier by holding down cable while soldering. In addition, such mechanical retention makes for a superior solder connection.
• Will handle up to 15 A. rms (maximum).

Specifications:

• Contact Resistance (typical Dependent on MatingJack):< 0.020 ohms
• Dielectric Withstand Voltage: 500 VAC (minimum)
• Insulation Resistance @ 500 VDC: 2,000 megohms(minimum)
• Insulation Resistance (after MIL-STD-202 Salt Spray):1,000 megohms (minimum)
• Working Voltage: 250 VAC, 140 VDC
• Current Carry @ Working Voltage (typical Dependent onMating Jack) : 15.0 AMPS
• Insert/Withdrawal Force: Dependent on Mating Jack
• Soldering Requirement: ANSI/J-STD-001
• Temperature Range: -40° to + 85° Centigrade
• U.L. Component Recognition File No.: E118169
• Life: Dependent on Mating Jack
• Maximum Cable Size: 12 AWG stranded, up to .450"diameter
• Tip: Nickel-plated copper alloy
• Sleeve: Nickel-plated copper alloy
• Handle: Nickel-plated copper alloy
• Tip Terminal: Copper alloy, electrotin-plated
• Cable Clamp: Copper alloy, electrotin-plated
• Insulators: Thermojet plastic, thermoplastic, thermoplasticfilm, P.P.O.

Our Part #  188